Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Can the 80-102 mortise cylinder be ordered with other blocking ring sizes?

Resolution: The 80-102 mortise cylinder can be ordered with blocking rings in 1/8", 3/16", ¼", 5/16", 3/8", 7/16" and ½" thicknesses. Specify the required blocking ring thickness when ordering. :

Can the 80-132 mortise cylinder be ordered with other blocking ring sizes?

Resolution: The 80-132 mortise cylinder can be ordered with blocking rings in 1/8", 3/16", ¼", 5/16", 3/8", 7/16" and ½" thicknesses. Specify the required blocking ring thickness when ordering. :

Can the 80-302 mortise cylinder be ordered with other blocking ring sizes?

Resolution: The 80-302 mortise cylinder can be ordered with blocking rings in 1/8", 3/16", ¼", 5/16", 3/8", 7/16" and ½" thicknesses. Specify the required blocking ring thickness when ordering. :

Can the Falcon 8200 operator power two wave actuators?

Resolution: The 8200 series Falcon operator has enough output power to power up two wave actuators but the 8200 only has .25 amp maximum output power and will be close to being maxed out.:

Does LCN offer Custom Color Matching for Powder Coat Finishes?

Resolution: LCN does offer a custom color match option. This is only for Manual Closers.It would require a sample of the color to be sent to the LCN factory.We would then work to try to match the color. ...:

Can the Bolt from the Schlage Encode Be Reused When Installing an Encode Plus?

Resolution: While both the Schlage Encode and Schlage Encode Plus use the same tapered deadbolt, it is not recommended to reuse the bolt. Whenever you install a new Schlage lock, it is best practice to replace...:

Can the Falcon MA311 mortise lock be ordered with an inside indicator?

Resolution: The Falcon MA311 Indicator option is only for the outside.:

Is the baseplate for QEL 22 series different than standard 22 series baseplate?

Resolution: Yes, the baseplate changed in order to add the QEL motor. They added pushbar "stops" to the bottom of the baseplate.:

What is height of Ives 7230F bottom pivot base?

Resolution: The plate portion of the 7230F Bottom Base is 1/4" tall:

Are INS-2 Kits available for the Falcon 24-C & 25-C?

Resolution: The INS Kits for 24-C and 25-C Concealed Vertical Rod Exit Devices are now available as standard product and are listed in the Falcon Price Book.Please provide the total thickness of material and t...: