Ask your question
User questions
- Can 5100 electric strikebe used on fire rated door?
- Is the Von Duprin 6223 fire rated for pairs of wood doors?
- Can the electric strike be used with a vertical rod device on a fire-rated door?
- Can the 9949 CVC be used on fire rated wood doors?
- What is the largest diameter hole that Steelcraft can provide for viewer preps?
- What is GrainTech?
- Which strike do you use with an XP98/99 device?
- Fire Rating for AD and CO locks
- What Glynn Johnson overhead stop do I need if I want heavy duty surface mounted?
- Can a 4110 EDA and a Glynn Johnson 100 be used together?
- What special template (ST) is used with a 2030 closer and GJ over head stop?
- Will a GJ 90 overhead stop work with an LCN 4642?
- Where can I find hurricane ratings for Schlage and Falcon?
- Is the XP98/99 device hurricane rated?
- Which mullions are Hurricane Rated?
- Is there a Fire-Rated 33A Rim device?
- Is the Von Duprin 1609 strike fire rated for pairs of doors?
- What different types of door coordinators are available?
- My COR is not allowing my inactive leaf with push side overlapping astragal to close first.
- What is the Buy American Act (BAA)?
- Are flush bolts available on the inactive leaf of hurricane double doors with either FBC or NOA approvals?
- Does any of the Ives VR trims work with non-IR exit devices?
- Why are the bolts larger on the 8102, 8103, 8103EZ, 8190, 9100, 9103EZ, 9190?
- What is the model number for the Ives door edge pull?
- What actuators can be used on the 8310-866 Bollard post?
- What is the Buy American Act (BAA)?
- What wire gauge is recommended for LCN hardwired actuators?
- BLOW-OPEN
- What are Pneumatic Automatic Operators?
- Are window kits available for Steelcraft doors?
- How is glass cutting size figured for standard or special glass light installed?
- Are doors available for use with non Steelcraft window kits?
- Can a door have an InPact device and glass lights?
- What is the maximum glass light size on a 90 min (1 1/2 hour) fire rated door?
- Are glass lights available in the H-Series door?
- What is the maximum glass size available on the T-Series door?
- What is the minimum dimension from the edge of the door to a glass light cutout?
- Can a Von Duprin 996L trim be converted to E996L trim?
- How do I replace an E996L solenoid?
- What is the part number for the Von Duprin E996L solenoid?
- What are the Von Duprin part numbers for RX, LX and RX,LX-LC switch kits for field installation?
- How do you convert the Von Duprin 370 series controls to NL or night latch function?
- Does the Von Duprin CD kit include the machined cover plate for the cylinder?
- Can the Von Duprin EL option be added to any existing 98/99 device?
- What is the part number for the end cap and bracket for the 22 device?
- What is the part number for the Schlage thumbturn rim cylinder?
- What is the part number for the 88 series dogging screw?
- What is the size of the current Von Duprin dogging key?
- What is the part number for the Von Duprin maintenance kit?
- Does Von Duprin supply the 9875, 9975, 9875-F and 9975-F mortise exit devices with NL-OP trim function?
- What cylinders are used to operate Von Duprin devices?
- What would cause the Von Duprin 88 series exit device latchbolt not to extend and the crossbar to droop?
- What parts do I need to add to the bottom rod of my existing Von Duprin 8827 LBR exit device?
- Where is the cross reference list for PS800 to PS900 series power supplies?
- How do you identify the model of a Falcon closer?
- Does the PD listed with lock model number mean anything?
- How do you identify the model number and date code of an LCN cast iron hydraulic closer?
- What are the model numbers for the new Schlage and XceedID wall mounted credential readers?
- What is the model number for the Ives door edge pull?
- Why would a 4600 not open a full 90 degrees?
- MOTOR CLUTCH
- I get three green blinks of the Schlage key and it says motor stall on my SUS/HHD during diagnostics?
- What would cause a 4600 (4630/4640) to keep blowing fuses as soon as the 120VAC cable is plugged into control box?
- 4600 with EO3, how to troubleshoot and how can you check the clutch and motor on a 4600 operator?