Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
handkey with card reader
”
RELATED FAQS
Question
Answer
What is the reader address for a master F-Series HandKey II?
Resolution:
A F-Series HandKey II can be operated as a stand-alone access control station, as a network master enrollment station, or as a networked access control station which receives and processes co...:
What Proximity technologies do XceedID readers support?
Resolution:
ISOX card technology is no longer supported - contact XceedID sales:
Can the AD-Series and CO-Series magnetic card credential readers be set to read data from different magnetic card tracks?
Resolution:
Customers will need to use the Schlage Utility Software (SUS) on the HHD lock programming device to set the desired magnetic track to be read for access control, if not using default Track 2&n...:
CM Magnetic Stripe Card Track Options
Resolution:
CM locks with a magnetic stripe reader can only be set to read one of the three mag tracks at one time. The CM lock with magnetic stripe reader was shipped from the factory with the magnetic stripe...:
What is the purpose of the 900-2RS board?
Resolution:
The 900-2RS option board is used with PS914 power supply to isolate the inputs such as key pads or card readers from the outputs for EL electric exit devices. The EL draws 16 amp inrush that needs...:
Schlage MTMS15 and MTMSK15 Reader Compatiblity with CT5000
Resolution:
The Schlage MTMS15 and MTMSK15 readers are multi-technology readers designed to work across many different types of systems. Since there are many different magstripe clock/data formats, t...:
What is the power output of a 4600 operator?
Resolution:
The 4600 Series operator has both a 12VDC and 24VDC output rated at 1A (combined load) to power strikes, maglocks, and other devices, but an EL device "always" has to have a separate PS914-2RS Seri...:
Will the door unlock if a Von Duprin CX 98 / 99 Chexit device is deactivated with card reader and has a 996LBE trim?
Resolution:
When a CX99L-BE is not armed the exterior 996L BE lever trim will be free to retract the CX latch for entrance. When the CX99-L BE is armed the exterior 996L BE lever will not move and...:
What are the steps I need to take in order to do a card emulation test between biometric hand readers?
Resolution:
If an access control system is not available to test the card output on a hand reader, this card emulation test can be done to verify the card format is correct. These steps will guide you in...:
Can I communicate via RS-232 to a Hand Reader if they have an EN-200 ethernet or MD-500 modem installed?
Resolution:
If a hand reader has an ethernet or modem card installed, the RS-232 port will be automatically configured as a printer output and RS-232 option removed from the SET SERIAL menu. In order to ...:
What card types and formats will our AD and CO smart readers support?
Resolution:
See attachment for details: Smart readers support::
What card formats will our AD and CO magnetic swipe readers support?
Resolution:
See attachment for details: Magnetic Swipe reader supports::
What card types and formats will our AD and CO proximity readers support?
Resolution:
See attachment for details: Proximity readers support:
What does the message "ID temporarily invalid" mean when it displays on a biometric hand reader?
Resolution:
Our biometric hand readers have a limitation on how many times you can try an unsuccessful hand verification. This is similar to secure computer/ system logins that kick you out after a certa...: