Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

What is the power output of a 4600 operator?

The 4600 Series operator has both a 12VDC and 24VDC output rated at 1A (combined load) to power strikes, maglocks, and other devices, but an EL device "always" has to have a separate PS914-2RS Series power supply.


Wiring for "Fail Secure" strike:


  • Connect (-) lead of strike to terminal 2.

  • Connect (+) lead of strike to terminal 23.

  • Connect a (Jumper) wire from terminal 3 to 22 (for 24VDC), or from 5 to 22 (for 12VDC) strike.

Wiring for "Fail Safe" strike or maglock:


  • Connect (-) lead of strike to terminal 2.

  • Connect (+) lead of strike to terminal 24.

  • Connect a (Jumper) wire from terminal 3 to 22 (for 24VDC), or from 5 to 22 (for 12VDC) strike.

Wiring for "Fail Secure" EL device (Von Duprin):


  • Connect terminal 22 to the "SC" terminal of the Von Duprin 900 Series power supply.

  • Connect terminal 23 to the "I1" terminal of the Von Duprin 900 Series power supply.

  • Connect the EL device to the "O1" and "GND" terminals of the Von Duprin PS914-2RS Series power supply.

DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.

Other users ask

Question
what power supply for Falcon EL
low energy operator
operators with mag locks
intrinsically safe maglock
what wire gauge on electric strikes