Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Resolution: Torx head screws are only available as machine screws.:

4040XP door closer door too hard to open.

Resolution: The 4040XP closer can be hard to open if the Spring Adjustment is set to strong. Try reducing the spring power by turning it down on closer (counter-clockwise).:

What are the minimum header lengths for a Senior Swing?

Resolution: The minimum header lengths for a Senior Swing with standard Spindle centers are:Concealed 2810 Series:2811 single door (offset pivot or butt hinge) -- 33".2811 single door with stop (cent...:

Is the MA lock available with the RX feature?

Resolution: The MA RX features a single switch within the chassis that will monitor both the inside and outside knob/lever. The switch is only available as Normally Open (NO).:

Can a WS98/9927 device be installed on another manufaturers FEMA rated doors?

Resolution: The WS98/9927 device has only been tested with Steel Craft Paladin doors.:

What type of cylinder does theVon Duprin 373L trim take?

Resolution: All Von Duprin 370 Series trims require a 1 1/4" mortise cylinder with a straight cam.:

Can you mount an LCN 4010 with GJ100 series stop?

Resolution: ST-1544 is needed to mount the 4010 door closer and GJ 100 or GJ 410 series concealed overhead stop together.ST-1544 requires the use of a 4020-18 drop plate ordered as a separate line it...:

How many 4040 SE's can be powered from a 4040SE-3210 transformer?

Resolution: LCN recommends that only 2 to 3 -- 4040SE or 4310/4410ME 24V closers be powered from one 4040SE-3210 transformer. :

What is an old Dor-O-Matic 99000 series operator?

Resolution: The 95000 Series Ascent operator(also known as the Benchmark I) is an obsolete operator that was made by Dor-O-Matic who is now out of business. Only the arms from a Benchmark III operator will wor...:

Can the Schlage L or LP section key blank be cut in the field?

Resolution: Schlage does not recommend cutting the L or LP section key blanks in the field. Below are some details.Non Primus:In the classic family of keyways the "L" key section is the highest level key...: