Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Should I use Dummy trim on an Inactive door using Automatic Flush Bolts?

Resolution: On a door with automatic flush bolts, the inactive leaf can’t have a dummy lever, push bar, or other hardware that would make it appear that the Inactive leaf could be operated for egress. ...:

What is the Falcon FA-CN-1026 IC core pinning chart?

Resolution: Falcon at one time offered the FA-CN-1026 "slide rule" pinning chart for A2 interchangeable core pinning. This part is no longer available.:

How does the Von Duprin 98/99 -2 & -2SI work?

Resolution: The Von Duprin -2 & -2SI function locks/unlocks the "outside" lever with the "inside" cylinder. The "outside" or "pull side" cylinder only retracts the exit device latchbolt (Night Latch ...:

Is there a "conversion kit" for the Von Duprin Chexit?

Resolution: No, there is NOT a conversion kit for the Chexit. This device must be ordered "complete" from the Von Duprin factory. :

Will the Von Duprin 98/9927 Surface Vertical Rod device work for 10' door heights?

Resolution: An extension rod is required to reach a 10' door height when using the 98/9927 exit device. The device is supplied for a vertical rod that reaches 7' from the factory. :

Does the Von Duprin 22 offer the CD (cylinder dogging) option?

Resolution: No, the Von Duprin 22 does NOT have the cylinder dogging option available. :

What is the recommended height for the HL6 above the finished floor?

Resolution: 45" above the finished floor (to center line of lock) is recommended for the HL6, PL7 and PL8 tubular locks regardless of the push/pull paddle orientation.:

What is the recommended height above the finished floor for the HL6-9000?

Resolution: 39-15/16" above the finished floor is recommended height (to center line of lock case) for the HL6-9000 series regardless of push/pull paddle orientation.:

Will the Monarch 17 series trim work with the Falcon 24 Rim device?

Resolution: Yes. The trim input is the same on a 24 Rim device as it was on a 17 series Rim device.:

What Ives hinge is labeled 27G5?

Resolution: 27G5 is not a model number. It is the UL listing stamped into Ives Aluminum Geared Continuous Hinges. To identify the model of the hinge, compare the shape and size of the door and f...: