Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

What lever and cylinder options are available for the ALX series?

Resolution: With the exception of Yale and Medeco, the ALX series offers a similar range of lever and cylinder options as the ND-series. However, not all cylinder options are available with all levers. Refer t...:

What is the part number for an LCN hold open wrench?

Resolution: The part number for the LCN hold open wrench is T1157. EXCEPTION: The LCN 1250 and 1450 Hold open wrench is different and would need to be order as T1157 – NOTE: send 1...:

What is the part number for the arm screw on an LCN manual closer?

Resolution: Specify LCN Closer series - 159.This is the screw that attaches the arm to the Closer Body.For example -- If you have a 4040XP closer and need the arm screw. You would order a 4040XP-15...:

How do the emergency keys operate the B571 and D271 indicator deadbolts?

Resolution: On the B571 and D271, the emergency keys (61-509 and 61-510) can only be inserted/retracted when the bolt is thrown. The procedure is as follows:insert emergency key into locked deadboltturn ...:

Is there a QEL conversion kit for the Von Duprin Inpact 94 or 95 series exit device?

Resolution: The QEL 94/95 Series Motor Conversion Kit (part number 958005) may be used to convert any mechanical 94/95 series device to QEL. It may also be used to replace an existing 94/95 series Q...:

What are the dimensions of Schlage L9000 Gen1 180 degree sectional cylinder indicator?

Resolution: :

When is Everest SL a good solution?

Resolution: This document outlines the parameters and shows some example cases for when Everest SL should be used.:

How do I get the Allegion wire harness through the 3/8" raceway in a wood door if it is tight?

Resolution: You could use a small amount of Dielectric Grease on the cable sleeve to make for a smoother transition of the cable through the raceway if needed. :

What is an ND81 function?

Resolution: See also ND81 Accessible Storeroom Operation video:

When did the L Series change to an new ADA Thumbturn?

Resolution: Effective December 9, 2019, Schlage L Series mortise locks requiring a thumbturn will ship standard with our new ADA thumbturn. The new ADA thumbturn is slightly smaller than the existing ADA desig...: