Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Resolution: Trimco launched a lockdown hardware specifically for 98/99 and 33A/35A devices. In response to this, please take note of the following: This design creates a situation where anyone, even those wit...:

Hinge Pin Stop #70 , Diameter of Hinge Pin

Resolution: Note: All the hinge pin stops were meant to work with either ¼” or 5/16” diameter hinge pins.However, the #70 hinge pin stop was slightly changed (as of 2015 approximately) ...:

FC Series: Allen Wrench Size

Resolution: The Allen wrench (hex key) for the Schlage Custom Series locks is a standard 3/32-inch size. :

what key cylinder does teh 5547NL x 555NL use?

Resolution: 1-1/4" rim cylinder.:

Can the electrified XY hinge replace the electrified HD hinge?

Resolution: The following details need to be taken into account if replacing the obsolete HD continuous hinge with the TWP or TW8 option with the new XY hinge with the TWP-CON option. &n...:

Can EPT's be used wtih windstorm solutions?

Resolution: Steelcraft can prepare doors and frames for an EPT in the windstorm offering.The use of electrical hardware must be approved by the building officials.Please contact Steelcraft technical support fo...:

What is the part number for the Falcon 2390 anchor block assembly ?

Resolution: The part number for the Falcon 2390 anchor block assembly is BLOCK.103:

What exit device should I use on a balanced door?

Resolution: For balanced door applications, please see the Von Duprin price book under "Special Order Products" for a balanced door option. This special provides a 3' Device with a 4' Mechanism case.&nbs...:

What is holding force for CL11 or CL 12 ?

Resolution: There is no tested holding force available for the CL11 or CL12 cabinet latch. These devices are designed to latch a regular cabinet or light weight door ( such as closet or pantry). &nbs...:

Is a plastic cushion included with all automatic door bottoms (ADB) ?

Resolution: Yes, a plastic cushion is included with all screw packs shipped with Automatic Door Bottoms. This cushion is used to minimize marking on a wood frame.: