Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Resolution: You are limited to 25 characters.:

Is the Falcon MA911 mortise lock handed?

Resolution: Pictures of turn hub differences here.:

Can you field add an RX switch to a 1690/1790 exit device?

Resolution: The 1690 and 1790 exit devices built after 2002 can have the RX switch kit added in the field. The part number is SWITCH.1006.:

What is included in a 154 mullion stabilizer kit?

Resolution: The kit contains components for two doors and a mullion. The kit has two door portions, two mullion portions, and shims. These interlocking stabilizers sets are furnished standard with ...:

Can the Molex connector be cut off and be hardwired?

Resolution: The Molex connector can be cut off and wired directly.:

What does a Von Duprin glass bead kit contain for concealed rod applications (GBK-CV)

Resolution: The GBK-CV and GBK-CV-WDC contain glass bead shims as well as a unique bottom rod and bottom rod linkage. :

What does ZAG mean in a Zero specification?

Resolution: Zero offers scored ligature-resistant gasketing to prevent the gasketing from being used for other than intended purposes, including harming self or others. Gasketing ordered with this featur...:

Will the Von Duprin 6000 strikes run on AC voltage / current?

Resolution: The 6000 series of strikes require DC power.If AC is available, an "SO Kit" can be used to convert AC voltage to DC voltage for powering the strike.For basic wiring requirements and &nb...:

Can continuous hinges be cut to custom length at the factory?

Resolution: Continuous hinges can be cut to custom length at the factory. Additional charges for this are shown in the price book. Specify door handing when requesting custom cuts, as cutting some ...:

Are parts available for FE210 or BE367?

Resolution: There are no parts available outside of levers, cylinders and cylinder caps.: