Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

What is the door range for the Falcon K lock?

Resolution: Door Range 1-3/8" - 2-1/4" standard.:

Where is the template for Pool Gate Device?

Resolution: There is a template that gets mounted to the opening during installation for proper placement of holes. A template will come with the 98/9952 exit device when ordered.Ordering the template se...:

Can you convert the Von Duprin 7500 lock body from classroom to nightlatch function?

Resolution: The 7500 lock body can be converted from classroom function to nightlatch by changing the lever trim from 996-L-M to a 996-L-NL-M. The “-M” at the end of that part number must be specified to...:

Does the 8827 have a nightlatch function?

Resolution: The 8827 does not have a nightlatch function. TP-NL or TL-NL functions are available.:

Did the Schlage D knob spring latch and dead latch part number change?

Resolution: In June of 2017: 14-001 Spring Latch was changed to the 13-248 14-019 Dead Latch was changed to the 13-247 :

AD-Series Troubleshooting guide

Resolution: :

When did LCN change the plated finish option of US10B to US 11?

Resolution: This change took place back around 2002.This is a subtle change as the color is still the same but US11 is sealed whereas US10B was oiled. :

Will an HL6 work with an 88 series rim device?

Resolution: No. The HL6 square spindle/hub does not orient with the receiver of the 88 series.:

What SNB is needed with 499F strike hook on wood door?

Resolution: The strike hook for the 499F or 954 strike is mounted with 2 each 1/4-20 screws which could be paired with 325 SNB's.The 325 SNB's are required for use with 499F or 954 strike hook when installed o...:

How much can be cut from a 355 door bottom?

Resolution: You can safely cut up to 3" from a 355 door bottom.: