Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Can a 112 HD or 112XY continuous hinge be used on a 2 & 1/4" door?

Resolution: The 112HD/112XY hinges are made for and tested on 1-3/4" thick doors only. For 2" - 2 & 1/4" thick doors we recommend using the 026XY or the 027XY.:

Will the Schlage AD series trims work with the Falcon 25M exit device?

Resolution: No. The AD & CO 993 trims will only work with the 25-R devices in the Falcon line.Schlage AD CompatibilitySchlage CO Compatibility:

What is the minimal wiring to bench test a Chexit device?

Resolution: FOR TESTING PURPOSES ONLYThe following wiring can be used to verify that the device will arm and alarm.The FA Connection (a Normally Closed Fire Alarm Dry Contact between the Yellow and Red wires o...:

Will an 88EO accept a rim cylinder?

Resolution: Yes.:

Part number for EL plunger Allen set screw?

Resolution: 964059-89:

Is it possible to cut a Zero automatic door bottom (ADB) ?

Resolution: Following are considerations for cutting an Automatic Door Bottom (ADB): Zero ADBs can be trimmed down in the field to better fit the opening. Trimming must be done on the lock...:

What grade is the HL6 and HL6 9000?

Resolution: The HL6 & HL6 9000 locks are not graded.:

What is the door range for the Falcon K lock?

Resolution: Door Range 1-3/8" - 2-1/4" standard.:

Where is the template for Pool Gate Device?

Resolution: There is a template that gets mounted to the opening during installation for proper placement of holes. A template will come with the 98/9952 exit device when ordered.Ordering the template se...:

Can you convert the Von Duprin 7500 lock body from classroom to nightlatch function?

Resolution: The 7500 lock body can be converted from classroom function to nightlatch by changing the lever trim from 996-L-M to a 996-L-NL-M. The “-M” at the end of that part number must be specified to...: