Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Is an RPA required when ordering an SFIC housing with construction core?

Resolution: SFIC housings with construction core do not require an RPA. For example, the 80-132 is not restricted to purchase with a Construction Core. Although to purchase the SFIC with a core will need...:

What does the mountain logo on a Schlage key and cylinder represent?

Resolution: The Schlage Everest logo is a stylized mountain peak or "Everest" symbol, often featured on the keys and cylinders of the high-security Everest lock system.:

Can the additional door prep from an HL6 be covered by an L9000 escutcheon?

Resolution: The through holes from an HL6 that was mounted vertically can be covered by an N Escutcheon. If the HL6 was mounted horizontally we do not offer anything to cover the prep. :

What hinge reinforcements are used for Republic bullet resistant doors?

Resolution: Universal Standard/Heavy Weight Hinge – Levels 1, 2, and 3 are prepped for (3) 4-1/2" or 5" butt hinges up to 3476 nominal size opening. Over 3476 and Levels 4-8 (all sizes) are prepped for (4) 4-1...:

What SDI Level/Model are Republic bullet resistant doors?

Resolution: Level 4 Model 2:

What sizes are available for Republic bullet resistant doors?

Resolution: Minimum 1'0" x 1'0"Maximum 4'10" x 10'0":

What closer reinforcement is available for Republic bullet resistant doors?

Resolution: Only available on Levels 1-3. Closer reinforcement not necessary on levels 4-8 due to plating in construction requirements.:

What handing is available for Republic bullet resistant doors?

Resolution: Non-Handed (Handed optional):

What face skins are available for Republic bullet resistant doors?

Resolution: 14 gauge (cold rolled steel or A60 Galvannealed):

What cores are available for Republic bullet resistant doors?

Resolution: Polystyrene Levels 1Polystyrene with armor plating Levels 2-3Mineral wool or fiberglass batting with armor plating Levels 4-8: