Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Are the spindles for the L9000 HSLR different than the L9000 series spindles?

Resolution: The HSLR uses two styles of spindles; split and solid. The split spindles are available in screw pack # 47279023The solid HSLR spindle for function L9091,93 and 95 is part # 47269684:

Can the L9000 MLR lock be powered by an LCN Auto operators' onboard power supply?

Resolution: The LCN auto operator has an onboard power supply but only provides up to 1 amp of power. The L9000 MLR locks requires 1.4 amps to operate properly, therefore the Auto operator will not provid...:

Does the L9000 HSLR utilize the standard L series spring cage?

Resolution: The Schlage L9000 HSLR locks use the L283-040 spring cage. This is the same spring cage used by L series mortise locks without HSLR trim.:

Why are the through bolts required for the 9827 top and bottom latches?

Resolution: Because the latch is where the bulk of the force to hold the door shut would be exertedThrough-bolting those latches provides the best means of securing the latches to the door and is required per ...:

What mounting group to use with a Glynn Johnson 90 series and continuous hinge

Resolution: If possible, select a listed item that has its pivot point close to the item you are using.Many continuous hinges have pivot points close to where a 4.5" wide butt hinge or 4.5" swing clear hinge b...:

Is the standard strike for the 054 dutch door bolt available as a sellable item

Resolution: The 054Dutch Door Bolt Standard Strike is not sold separately.The Mortise Strike is available for purchase by itself (09-22-605 Bright Brass, 09-22-613 Oil Rubbed Bronze, or 09-22-626 Satin Chrome).:

What is the dimension of A12638-000-00 BEST style pinning cap?

Resolution: Falcon's A12638-000-00 (BEST style pinning cap) dimensions are:Diameter: .118" - .119"Height: .023" - .027":

Can the Glynn Johnson 100 ADJ be converted to standard overhead

Resolution: The track and arm assembly are different between ADJ and standard models.Therefore, one cannot be converted to the other in the field. :

When did the PM Performance Series launch?

Resolution: The PM Performance Series launched 9/15/2025.:

When did the PT Performance Series launch?

Resolution: The PT Performance Series launched 9/15/2025.: