Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

What is the purpose of the pushbar guides in Von Duprin devices?

Resolution: The pushbar guides ensure the pushbar remains centered in the mechanism case and provides support to the bar assembly.:

What handing is available for Republic lead lined doors?

Resolution: Handing Design – Non-Handed standard (Handed optional):

What hinge reinforcements are used for Republic lead lined doors?

Resolution: Universal Standard/Heavy Weight Hinge – Frames for 1-3/4" doors shall have a 7 gauge steel hinge reinforcement plate, projection welded with provisions for 4-1/2" x 4-1/2" template hinges. Hinge pl...:

What SDI Level/Model are Republic lead lined doors?

Resolution: SDI 100 Level/Model – Level 2-4 Model 1 (Maximum Duty Performace Level A and B):

What closer reinforcement is available for Republic lead lined doors?

Resolution: Closer Reinforcement (Optional) – 1-3/8" x 14" x 14 gauge plate:

What face skins are available for Republic lead lined doors?

Resolution: 16 or 14 (12 gauge available with coped corner condition for welding):

Did the bottom pins change in the 40-132 Retail Keying Kit?

Resolution: The bottom pins in the 40-132 Retail Keying Kit change in December 2012 from the 34-300 through 34-309 to 34-213 through 34-222.:

What is the spindle length for the L9000 SL1 or SK1 trim?

Resolution: Both the SL1 and SK1 trim will use the standard-length spindle for a 1-¾" door application. See the current Commercial Pricebook for other options. :

Is a bottom latch required on a LM9200 for a 45 minute fire rated wood door application?

Resolution: The LM9200 series must have both the top and bottom latch when installed on a 45 minute fire rated wood door application.:

Can you cut the bottom rod of a 98/9927

Resolution: Yes. You can cut the bottom rod the same way you can cut the top rod if necessary.: