Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Have they changed the design of the 179L, 179L-BE, 179L-NL.

Resolution: The escutcheon of the 179L Series trims changed from having black plastic caps at the top and bottom to being a single metal escutcheon in 2012.:

Can you use a soss hinge with a 4010 closer?

Resolution: The 4010 can be used with invisible hinges like the soss or tectus hinges. Here we take all the measurements for the arm and closer body from the pivot point of that hinge.:

Can any Falcon closer, mounted pull side, work with a reveal?

Resolution: The Falcon door closers SC71A, SC81A, SC61A and the SC91A, SC93A and SC94A series closers can only handle pull side reveals up to ¾”. Any pull side reveal greater than ¾” will need to go to the LCN...:

Is there a Power Transfer (PT) option for the 218H model SOSS hinge?

Resolution: SOSS does not have a PT option in the Hercules hinge models.However, the 218PT hinge and the 218H hinges has the same pivot point and can be used on the same door.The 218PT should be added to the a...:

What cores are available for Republic lead lined doors?

Resolution: Steel Stiffened core:

What is the bottom channel for Republic lead lined doors?

Resolution: Bottom Channel is an inverted 16 gauge steel channel, projection welded at a maximum 2-1/2" on center:

What is the top channel for Republic lead lined doors?

Resolution: Top Channel is a flush 16 gauge steel channel, projection welded at a maximum 2-1/2" on center:

What is the lock rail for Republic lead lined doors?

Resolution: Lock edge is non-beveled and reinforced with a continuous 16 or 14 gauge steel channel projection welded at a maximum 5" on center. (Beveled lock edge 1/8" in 2" optional.):

What is the hinge rail and reinforcement for Republic lead lined doors?

Resolution: Hinge edge is non-beveled and reinforced with a continuous 10 or 16 gauge steel channel projection welded at a maximum 5" on center:

Can the 4050AT, mounted pull side mount be used with soss hinges

Resolution: The 4050AT mounted pull side can be used with soss invisible hinges. Just take all measurements (closer and track) from the center line of the pivot.: