Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Can a surface mounted Sr Swing be used with Pocket Pivots?

Resolution: You can use a Sr Swing, push side mounted with pocket pivots (use the push arm butt hinge/OP template) but you can't use the pull side mounted Sr Swing with pocket pivots because the swing of the d...:

Where can I find installation instructions for the Schlage CS210?

Resolution: Installation instructions can be found on commercial.schlage.com. Click here for instructions.:

What is the size of the LCN pneumatic control boxes?

Resolution: All LCN 7900 and 7980 series pneumatic control boxes are 15" X 15" X 6".:

Can you mount a 4640 on a 32” door?

Resolution: You can use ST-3071 to mount a 4640 on a 32” door. This will give the unit a 120 degree of power opening and the closer must be able to hang over the frame face at the hinge edge. No s...:

Can you mount a 4040XPT pull side with swing clear hinges?

Resolution: For you to use a 4040XPT mounted pull side on a door with swing clear hinges use ST-3471. This application limits the door swing to maximum 110 degrees. :

Did LCN ever offer an EDA145 arm?

Resolution: LCN did offer a EDA145 arm at one time but it was obsoleted in Jan. 2010. This was an EDA arm that had a special PA shoe that was made for applications that had a flush head frame condition on the ...:

Where can I find installation instructions for the Falcon H2101?

Resolution: Installation instructions can be found on us.allegion.com. Click here for instructions.:

Where to locate the default codes for a First Secure keypad lock?

Resolution: The First Secure by Schlage,which was sold exclusively at Walmart, does not come with a default programming sticker. Out of the box, or if a Factory Deafault Reset was completed; the default progra...:

Can the 179L Trim be re-handed in the field?

Resolution: Yes, you can re-hand the 179L trim in the field. The full instructions can be found here, Page 5, Step 5. Follow these instructions::

What is the 38-018?

Resolution: The 38-018 is a 1/8" thin door extension ring (2 per lock) for the A series and the S series. It has an outside diameter of 2-¾" and an inside diameter of 2-5/64" :