Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ wiring maglock ”

Resolution: The Benchmark III control has a 24VDC, 2.5 amp power supply, and built in relay for controlling electric strikes or other accessories less than 2.5 amps current load. For a fail secure strike, r...:

Can you power an electric strike or maglock from the 9500 Series Senior Swing?

Resolution: An electric strike or maglock (24 volt only) can be wired to a Senior Swing 2800/9500 series operator using the P10 Lock Interface cable.For Current Sr Swing control boxes with ID# 72940 on th...:

What is the power output of a 4600 operator?

Resolution: The 4600 Series operator has both a 12VDC and 24VDC output rated at 1A (combined load) to power strikes, maglocks, and other devices, but an EL device "always" has to have a separate PS914-2RS Seri...:

Can I bypass the circuit board on a M420 M450 or M490: Unsupported voids warranty

Resolution: No the M400 series of mag locks may not operate direct wiring the power to the coils . Bypassing the circuit board or direct wiring the coils is not supported and voids the warranty ...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ wiring maglock ”

RELATED FAQS