Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ wire length for power supply ”

RELATED FAQS

Resolution: VISIT US.ALLEGION.COM/EL-SUPPORT FOR TROUBLESHOOTING VIDEO, DOWNLOADABLE GUIDE, AND INSTALLATION INSTRUCTIONS(For best viewing, use Chrome or Firefox browser.)ALLEGION EL SOLENOID ELECTRI...:

What are the wire gauge and length requirements for QEL devices?

Resolution: Use #18 gauge wire up to 200 feet maximum distance from PS900 x 900-2Q power supply to the QEL exit device. The new QEL+ no longer requires the 900-2Q board but still needs a different option board...:

Why does the DC output voltage on the PS914-2RS or PS914-4RL drops when access control is activated?

Resolution: Following items could cause the DC output on PS914 series power supply to drop when access control is activated. Wrong gauge wire from power supply to the the power transfer. Excessive wire run...:

What wire gauge and run is recommended for Von Duprin electric latch retraction EL device?

Resolution: :

What is the power output of a 4600 operator?

Resolution: The 4600 Series operator has both a 12VDC and 24VDC output rated at 1A (combined load) to power strikes, maglocks, and other devices, but an EL device must have a separate Power Supply for motorize...:

How do you specify an exit alarm ALK with a hard wire to the power supply?

Resolution: All new 22, 33/35A and 98/99 series exit devices with exit alarm ALK option can be hard wired to the PS902 power supply as a standard feature.:

Is there a wiring diagram for EL and Von Duprin PS914-2RS power supply?

Resolution: Reference The 914 Installation instructions.: