Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ where can i find labels on Schlage L series locks ”

RELATED FAQS

Resolution: To obtain product certification forms:Download the BAA Catalog on the Allegion website Complete the information requested in the the BAA Catalog with a detailed copy of the prod...:

What backsets are available on Schlage and Falcon locks?

Resolution: SCHLAGE locks are available with the following backsets: Lock Series Lock Type ...:

Is there a round corner armor front for the L series mortise lock?

Resolution: The L series armor fronts are only available with square corners. :

Is the L-Series mortise lock UL rated?

Resolution: UL Listed for 3-hour fire door (except L9076 and L9077):

What is the wire gauge on the motor driven L9000 mortise locks?

Resolution: Supply wires - 24AWGRX wires - 20AWGLX wires - 20 AWG:

What parts are needed to install an L lock on an 1 3/8" door?

Resolution: The standard L9000 lock can be ordered for thin doors (1 3/8") and the appropriate parts will be shipped. The LV9000, L400, LM9000, Anti-Ligature, and N escutcheon trims a...:

What is the part number for the L series handing screw?

Resolution: Screw part number is L583-485. Screw type: 8-32 UC-2A W/#6 Flat truss head Phillips recess, header point.:

What cylinder length do you use for escutcheon trim for the L series mortise lock?

Resolution: Typically for a 1-3/4" door you would use a 1-1/4" cylinder. Use the Table in the Pricebook for a reference:Note: The 30-001 used with Rose trim on double cylinder applications requires a Blo...:

What are the part numbers for the mounting posts and screws for an L9000 lock?

Resolution: Mounting Posts Part Number Door Thickness L583-211 1 3/8" L583-212 1 3/4" - See note section on SL1 trim L583-213 2...:

What does the hotel indicator look like for the A, AL, D, and ND?

Resolution: The indicator on a cylindrical hotel lock is a small pin that projects outward from the face of the cylinder plug (Figure 1) when the inside push button is depressed. When this pin is ...:

What grade of stainless steel do we use in the levers on L9000 locks?

Resolution: Schlage offers 629 and 630 stainless finishes on levers for the L-Series only. These levers are made of 303 or 304 grade stainless steel.:

What other locks can the blue lever removal tool 24002693 be used with?

Resolution: On August 15, 2012 Schlage began shipping a new, more ergonomic, lever removal tool to coincide with Phase 1 of the ND-Series improvement project. This tool can be used for Schlage ND-Series ...:

Can doors be prepared for raceways in the factory?

Resolution: Raceway availability: Optional factory installed raceways are available in doors but are not available in frames. Preparation Info: Steelcraft installs a flexible 3/4" ID steel...:

Are stainless steel doors and frames available?

Resolution: Yes, stainless steel doors and frames are available. Door Construction: LS-Series: Visible edge seams Door construction similar to the ...:

Is the Schlage Latitude and Longitude lever available in a stainless steel finish?

Resolution: Beginning January 2, 2013 Schlage will offer the Latitude (LAT) and Longitude (LON) levers in the 629 and 630 stainless steel finishes.:

Can you order the Schlage L series mortise lock with knob on one side and lever on the other?

Resolution: Includes the SL1 lever on one side and the SK1 knob trim on the other side.:

What are the part numbers for the inside and outside knobs for the L series?

Resolution: Inside knob and bushing: 09-402 plus design and finishOutside knob: 09-401 plus design and finish:

Available kits to convert classroom mortise locks to classroom security locks.

Resolution: Schlage has conversion kits to convert the classroom L/LV9070 to the classroom security L/LV9071 and the classroom holdback L/LV9076 to the classroom security holdback L/LV9077. The...:

What is the part number for a L mortise lock spindle?

Resolution: The Schlage L-Series mortise lock spindle and spring part number can be found in the Table 1. Spindles and Springs Part Number Description L283-060 Spindle and spring, 1...:

How long does it take to install a L Series mortise lock?

Resolution: Typical installation by an experienced Schlage L lock installer on a door correctly prepped for the Schlage L-Series function could take 10 to 20 minutes. Many outside variables can change the amo...:

How do you order the L series lock with an ADA thumbturn?

Resolution: Effective December 9, 2019, Schlage L Series mortise locks with a thumbturn will ship standard with our new ADA thumbturn. The new ADA thumbturn is slightly smaller than the existing design w...:

What type of switch is used for the RX and latch monitoring options for the ND and L locks?

Resolution: The ND-Series RX, the L-Series RX and latch monitoring switches are Form C - Single Pole Double Throw (also known as SPDT).:

How to build an L-Series chassis.

Resolution: This Step-by-Step guide is specifically designed for the functions listed below, however, it can be referenced with a majority of L series functions since most of the parts are ...: