Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ WHAT DOES RD SUFFIX MEAN ON SCHLAGE LOCK? ”

Resolution: The L9466 Store/Utility Room lock can provide this functionality. Operation: Latchbolt retracted by knob/lever either side. Deadbolt thrown or retracted by key from either side. When the deadbolt ...:

Are the 643e and 716 finishes the same?

Resolution: The commercial Aged Bronze finish (643e) is the BHMA equivalent to a copper plated, blackened, relieved and then clear coated product. This commercial finish is identical to the residential Aged ...:

How to convert a ND series lock cylinder format from PD to BD?

Resolution: On ND locks manufactured on or after January 30, 2017 only the SFIC lever and SFIC driver are needed to convert the lock from Full Size conventional (PD) or Full Size IC (JD, RD, TD) prep to S...:

What is the Multi Point LM9300 Series?

Resolution: MultiPoint locks are three-point locking systems that secure the door at three points – top, bottom, and traditional center latch location. Operating just like traditional locks, MultiPoint locks...:

Will Schlage locks with a BD suffix accept a BEST SFIC core?

Resolution: The Schlage B and BD cylinder suffixes designate less small format interchangeable core (SFIC) cylinder prep for the lock. Any SFIC, 6-pin or 7-pin, can be inserted into th...:

What does the cylinder suffix BDC mean?

Resolution: A small format disposable core is used as a SFIC construction core that is for low security applications and can be thrown in the waste bin after use.:

What type of core will a lock with the cylinder suffix "J" accept?

Resolution: The full size interchangeable cores or FSIC from Schlage.:

When ordering the ND lock less cylinder will it come with a tailpiece?

Resolution: The Schlage ND is shipped with a driver/tailpiece when ordered with a LD, BD, or JD suffix.:

Can I get the T series with a Schlage Full Size Interchangeable core?

Resolution: The T lock can accept a Schlage Full Size core, but the cylinder suffix must be specified as "J IC-SC" so the correct parts are supplied (including the tailpiece) Example: T581J IC-SC:

Can I get the RU series with a Schlage Full Size Interchangeable core?

Resolution: The RU lock can accept a Schlage Full Size core, but the cylinder suffix must be specified as "J IC-SC" so the correct parts are supplied. The tailpiece will come with the lock. Example: RU581J IC-SC:

Can I put a Schlage Key-In-Lever cylinder into a Falcon D100 or D200 lock?

Resolution: For a Schlage "C" keyway: Specify "CP6" as the cylinder suffix when ordering D100 or D200 locks (All other Schlage keyways are not available).:

Does the PD listed with lock model number mean anything?

Resolution: Schlage and Falcon use the P cylinder suffix to designate conventional key-in-lever (KIL) 6 pin cylinder. The D means that the lock will have a deadlatch.:

What is a Grade 2 Lock?

Resolution: Grade 2 locks are tested and certified to be in compliance with the following ANSI/BHMA Standards: Cylindrical, Bored and Preassembled Locks & Latches 400,000 Certified Cycles ANSI...:

Are the cabinet locks available with FSIC?

Resolution: Schlage has several options shown below. :

What is a Grade 1 Lock?

Resolution: Grade 1 locks are tested and certified to be in compliance with the following ANSI/BHMA Standards: Cylindrical, Bored and Preassembled Locks & Latches 8...:

Can a Von Duprin 7500 lock and device replace a Schlage L9000 series lockset?

Resolution: While they are both mortise locks they are not interchangeable. You would NOT be able to use a L9000 with a VD panic device. You would NOT be able to use a VD 7500 with Schlage lev...:

Does Von Duprin offer a classroom security option with visual status indication?

Resolution: Von Duprin offers two options: The CDSI/HDSI Dogging Indicator provides an at-a-glance verification of the status of the door from inside of the room. Visible “LOCKED” and “UNLO...:

Will Falcon B locks prepped for BD accept a 6 or 7 pin core?

Resolution: The B series accepts 6 or 7 pin small format cores when specifying with the "BD" cylinder suffix (less small format interchangeable core). The tailpiece shown below is used for bo...:

How to order a T series lock with a Corbin Russwin full size interchangeable prep.

Resolution: Specify the J cylinder suffix followed by IC-CR6 or IC-CR7 (6 or 7 pin Corbin core) Example: T581J IC-CR6 This will accommodate an 8000 or 8000-7 Corbin Russwin Full Size core.:

How do I specify temporary construction cores?

Resolution: Use the cylinder suffix 'T' for full size interchangeable core or the cylinder suffix 'HD' for small format interchangeable core, see Figure 1. Small format also has a disposable core option ...:

Warranty information on Allegion Commercial products.

Resolution: See here for our Warranty Information. :

Where can I find hurricane ratings for Schlage and Falcon?

Resolution: There are several Schlage and/or Falcon locks that have been tested and approved for this application. For Commercial use the locks have been tested and approved as ...:

When was the Schlage K mortise lock introduced?

Resolution: 1) General Lock was purchased by Schlage - 1973 2) General Lock moved to Security and turned into the K-lock - 1977 3) K-Lock discontinued - approximately 1984 4) L-lock introduced - approxim...:

What is the minimum stile for Schlage locks?

Resolution: The minimum stile for each lock will depend on the backset and the rose diameter/escutcheon width. See the Schlage Minimum Stile Requirements for the minimum stile for eac...:

What backsets are available on Schlage and Falcon locks?

Resolution: SCHLAGE locks are available with the following backsets: Lock Series Lock Type ...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ WHAT DOES RD SUFFIX MEAN ON SCHLAGE LOCK? ”

RELATED FAQS