Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ STEELCRAFT SECTION MORTISE LOCK PREP ”

Resolution: The minimum rose that can be used on the 61L (ANSI/BHMA A156.115.18) preparation is 3 7/16".Steelcraft's 61L lock prep (often referred to as the "Squashed Turtle lock prep") is designed for Bored L...:

Can automatic door bottoms be installed in standard Steelcraft doors?

Resolution: Special (custom) option: a special/optional end channel that will support the following manufactures: National Guard (422/423/522) Pemko (443) Zero International (360/364).:

What is the most common practice for running electric power from a frame to the door and hardware?

Resolution: Electrical hinges or a power transfer units are the most commonly used practices to run electric power to locks and/or strikes. Electric Hinges: Most electric hinges will fit into...:

What is the ANSI A115.1 Government 86 Door Prep for the L9000 lock?

Resolution: See image, ANSI A115.1 Mortise Lock Prep This door prep requires the N escutcheon with the L283-029 spacer kit to keep the springcage from falling into the door.&nbs...:

Can doors be prepared for raceways in the factory?

Resolution: Raceway availability: Optional factory installed raceways are available in doors but are not available in frames. Preparation Info: Steelcraft installs a flexible 3/4" ID steel...:

Where can I find hurricane ratings for Schlage and Falcon?

Resolution: There are several Schlage and/or Falcon locks that have been tested and approved for this application. For Commercial use the locks have been tested and approved as ...:

MORTISE PREPARATION

Resolution: 86, 86ED, 86EDR, 86EDV, 86R; Sectional Trim, mortise hinge, deadlock, door bottom:

86EDR

Resolution: Lock Prep, Mortise lock Prep, Edge Prep Only with RPD reinforcements; ANSIA115.1, Door Lock Prep:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ STEELCRAFT SECTION MORTISE LOCK PREP ”

RELATED FAQS