The current (digital control box) activation input wiring harness (# 761464-00) is included in the Sr. Swing parts bag (-518), and has 4 wires in it, Black, White, Yellow, & Gray.
This harness p...
The 8310-865 RF receiver contacts (N.O. and COM) would connect to terminals 15 & 17 (the alternate action input) on the 4600 operator.
The first activation would open the door, the s...
The LCN Bollard post (8310-866) only accepts the "square" actuators (no round actuators). The size of the Bollard post is 4” X 6” X 36”.
Acceptable actuator part numbers are:
Hard Wired - 831...
To convert a hard wired actuator button to a wireless actuator button you will need the following components:
An RF transmitter.
The 8310-844 transmitter for the (4-1/2" or 6" round, and the ...
To convert an RF actuator button to a hard wired actuator button, simply remove the RF transmitter an connect the hard wiring to the "Common" and "Normally Open" terminals on the the switch.
If the 9100 Series Benchmark operator does not open when the actuator is pushed:
Verify the unit has 120 volts applied to it.
Verify the the power light on the control box is on. If not, check ...
To program the 8310-865 receiver:
Set the dip switches 1 to the "OFF" (pulse) position.
Set the dip switches 2 to the "OFF" (0.5s) position.
Momentarily press the " No Delay" or "Delay" ...