Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ old sr swing controller ”

RELATED FAQS

Resolution: The 710095-00 (85445-900) and 84570-900 are the older Sr. Swing analog (non-digital) control. It is replaced by the current Sr. Swing digital control box. If you need to replace an old ...:

How do you get the digital read out to light up on the Senior Swing Control Box?

Resolution: There is a total of 4 red buttons on the front of the Senior Swing control box. To turn on the display, press and hold any 2 of the 4 red buttons at the same time for approximately 3-5 seconds. Y...:

What is the part number for the Senior Swing control box?

Resolution: The Senior Swing Series changed to the "Digital" control box in Sept. of 2006.:

Where does the 8310-877 safety sensor attach to the Senior Swing controller?

Resolution: The 8310-877 Bodyguard Safety Sensor attaches (plugs in) to the P1 connector on the Senior Swing controller. The 8310-846 (761462-00) wiring harness "included" with the 8310-877 safety sensor is us...:

Can you use a Senior Swing controller as a replacement for an obsolete Mid Swing controller?

Resolution: The Mid Swing was discontinued Sept. of 2009. The Sr. Swing control box has the power boost feature which the Mid Swing control box did not have. If you replace only the Mid Swing control box...:

What wires are the activation inputs for the Senior Swing?

Resolution: The current (digital control box) activation input wiring harness (# 761464-00) is included in the Sr. Swing parts bag (-518), and has 4 wires in it, Black, White, Yellow, & Gray. ...:

Is the 9500 Series Senior Swing handed?

Resolution: The Senior Swing "control box" is not handed. All Senior Swing motor "gearboxes" are handed, both the 2800 Series concealed and 9500 Series surface mounted operators. The 2800 Series "concealed a...: