Can you use a Senior Swing controller as a replacement for an obsolete Mid Swing controller?

The Mid Swing was discontinued Sept. of 2009.

The Sr. Swing control box has the power boost feature which the Mid Swing control box did not have. If you replace only the Mid Swing control box with the Sr. Swing control, and the power boost ever gets turned on, the Mid Swing gearbox will run backwards, indefinitely. So when replacing an obsolete Mid Swing control box, we recommend you replace BOTH the Mid Swing control box and gearbox at the same time to the Sr. Swing parts to avoid an this potential issue.

A Sr. Swing gearbox will work in a Mid Swing operator. However, the Mid Swing will now have an opening force of 11 lbs. (approximately) compared to 8.5 lbs of opening force of the Mid Swing gearbox.
 
 
A Mid Swing control box or gearbox WILL NOT work with an (obsolete) Astro Swing operator.

DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.

Other users ask