Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ l series manual ”

RELATED FAQS

Resolution: This Step-by-Step guide is specifically designed for the functions listed below, however, it can be referenced with a majority of L series functions since most of the parts are ...:

What parts are needed to install an L lock on an 1 3/8" door?

Resolution: The standard L9000 lock can be ordered for thin doors (1 3/8") and the appropriate parts will be shipped. The LV9000, L400, LM9000, Anti-Ligature, and N escutcheon trims a...:

What doors are available with monorail preps?

Resolution: Monorail cutouts are only available for non fire rated applications.:

Available kits to convert classroom mortise locks to classroom security locks.

Resolution: Schlage has conversion kits to convert the classroom L/LV9070 to the classroom security L/LV9071 and the classroom holdback L/LV9076 to the classroom security holdback L/LV9077. The...:

Is the Schlage Latitude and Longitude lever available in a stainless steel finish?

Resolution: Beginning January 2, 2013 Schlage will offer the Latitude (LAT) and Longitude (LON) levers in the 629 and 630 stainless steel finishes.:

What is the Buy American Act (BAA)?

Resolution: BAA/ARRA stand for Buy American Act and American Recovery and Reinvestment Act. A brief description of some of the federal requirements can be found in the BAA Catalog on the Allegio...:

What are the standard door and frame clearances?

Resolution: To determine Actual Door Size, the following values are subtracted from nominal door size (frame opening/order size) Actual Door Size: The largest measured width by height of the door leaf as m...:

What cylinder length do you use for escutcheon trim for the L series mortise lock?

Resolution: Typically for a 1-3/4" door you would use a 1-1/4" cylinder. Use the Table in the Pricebook for a reference:Note: The 30-001 used with Rose trim on double cylinder applications requires a Blo...:

How do you order the L series lock with an ADA thumbturn?

Resolution: Effective December 9, 2019, Schlage L Series mortise locks with a thumbturn will ship standard with our new ADA thumbturn. The new ADA thumbturn is slightly smaller than the existing design w...:

What is a mortise lock?

Resolution: Mortise Locks: a lockset where the case is designed to fit in a mortise in the edge of a door Medium, high to extra heavy duty Commercial, multi-family and institutional applications Pros - ...: