Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
HandKey II Certification
”
RELATED FAQS
Question
Answer
Schlage Handkey II (HKII) Power Supply Information
Resolution:
The reader requires a 12-24VDC power source. The unit can use either a 12 or 24VDC signal from an external power supply, or a plug-in power supply: PS-110 for 110VAC facilities. ...:
What is the Buy American Act (BAA)?
Resolution:
BAA/ARRA stand for Buy American Act and American Recovery and Reinvestment Act. A brief description of some of the federal requirements can be found in the BAA Catalog on the Allegio...:
How do you check what memory size is on a biometric F-Series HandPunch 3000?
Resolution:
A biometric F-Series hand reader usually comes with standard user memory. When a user is added that exceeds that user memory size, there is no room left to store that user and that user template c...:
How do I get into the menus on a biometric HandKey in order to enroll a user?
Resolution:
The HandKey II Command Mode Structure is used to access all menus in the HandKey. You hit clear and enter for the reader to ask ENTER PASSWORD if its a new reader. You hit clear and enter followed ...:
What is a cylindrical lock?
Resolution:
Cylindrical Locks: a bored lockset whose latch or bolt locking mechanism is contained in the portion installed through the cross-boreMedium, high to extra heavy dutyCommercial, multi-family and ins...:
What is an interconnected lock?
Resolution:
Interconnected Locks: a lockset whose trim provides a means of simultaneous retraction of two or more bolts which may also be operated independently Medium duty Commercial, government or multi-...:
What grade is the AL lock?
Resolution:
The AL lock is a Grade 2 lock ANSI/BHMA Certified A156.2-2003, Series 4000, Grade 2, UL Listed for 3-hour fire door.:
Does the ID3D HandKey and HandPunch have a red/green verification light like the F-Series?
Resolution:
Yes, the ID3D does have a red/green LED light option. It's used to indicate successful (green) or rejected (red) hand reads. The part number is GL-100 and it can only be installed in th...:
What does a Warning 80 or 17 mean on a F-Series hand reader?
Resolution:
When you see a Warning 80 or Warning 17 on a HandKey or a HandPunch, it may mean that the lithium battery is low. The first step is to try a warm boot on the reader to see if that h...:
What is an E-Series HandKey?
Resolution:
The E-Series HandKey biometric product measures the size and shape of a user's hand to verify the person's identity for accessing a secured opening. The E-Series HandKey is an all-metal unit ...:
How do you get the camera calibration values on a biometric F-Series HandPunch?
Resolution:
To get the camera calibration values on a biometric F-Series HandPunch or F-Series HandKey, press the * (asterisk) key 11 times. It will display R (row), C (column), and E (exposure)...:
How do you find the serial number of a biometric F-Series handpunch or Handkey II?
Resolution:
Yes, press the * (asterisk) key 10 times on the reader. The serial number will be displayed. A second way of locating the serial number on the reader is to visually check...:
What is the reader address for a master F-Series HandKey II?
Resolution:
A F-Series HandKey II can be operated as a stand-alone access control station, as a network master enrollment station, or as a networked access control station which receives and processes co...:
What BHMA Grade is the Falcon 25 Series exit device?
Resolution:
A copy of the BHMA Directory Listing can be viewed in the online Certified Directory on the BHMA web site. BHMA:
Do Von Duprin power supplies comply with European Directives and CE certification?
Resolution:
The Von Duprin and Schlage PS900 series power supplies do not meet this requirement.:
What certifications does the B500 meet?
Resolution:
The B500 deadbolts meet the following certification: ANSI A156.5, 2001, Grade 2. Available UL Listed for 3-hour fire door.:
What are the pin outs on the RS232/J4 connector on a F3-style main board in a biometric F-Series hand reader?
Resolution:
The RS232 pin out on a F3-style main board for a F-Series HandKey or a F-Series HandPunch to the J4 connector is Pin 1 (Pin 1 is the farthest pin from the edge of the board) is Groun...:
Customer receives "certificate error" when logging in to Schlage Home app
Resolution:
Check for anti-virus / anti-malware software active on phone / tablet. Temporarily disable until successfully signed in to app.:
How do I clear the HandNet for Windows error message, "Index or primary key cannot contain a null value" on a biometric HandKey?
Resolution:
This HandNet for Windows message appears only when a HandKey 2 connects to it for the first time. During the uploading of users from the HandKey 2 to HandNet, the software verifies the user d...:
What does error 64 mean on a HandKey II or Handpunch?
Resolution:
When you see an Error 64 on a HandKey or a HandPunch, it may mean that the lithium battery is low or there is a disconnect with main board. The first step is to replace the lit...:
FCC Certification
Resolution:
U.S. certification indicating that a product meets FCC standards regarding RF signal interference.: