Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ doromatic senior swing ”

RELATED FAQS

Resolution: The 710095-00 (85445-900) and 84570-900 are the older Sr. Swing analog (non-digital) control. It is replaced by the current Sr. Swing digital control box. If you need to replace an old ...:

How do I get service on my Astro Swing operator that isn't working properly?

Resolution: LCN does not does not have or supply any information for the old (obsolete) "High Energy" Dor-O-Matic Sliding doors, Bi-Fold doors or Astro Swing doors. You MUST be AAADM certified to work on, or g...:

What would cause a Senior Swing to open only 10 degrees and then close?

Resolution: Issue/Symptom – upon receiving an activation input the Sr Swing gearbox opens only about 10 degrees and then returns to the close position. Unit will never learn opening nor function pro...:

What parts are needed to change a Senior Swing 9530 to a 9540 operator?

Resolution: To convert a 9530 to an 9540 you need to purchase the 9540-3077 REG push arm assembly for reveals up to 10” or 9540-3077L long arm for reveals from 10” to 20”.To convert a 9540 ...:

What is the minimum and maximum reveal for a 9500 Series Senior Swing operator?

Resolution: The 9542, 9553, 9563 surface mounted Senior Swing with a regular arm, mounted on the push side of the door, can handle a reveal from 1 1/8" up to 10". The 9542, 9553, 9563 surface mounted Senior S...:

What is the difference between 4600 and Senior Swings from an application purpose?

Resolution: The 4600 is designed for an opening with (MOSTLY) manual traffic, and the (OCCASIONAL) automatic activation. The Senior Swing is designed for an opening with (MOSTLY) automatic activation, and (OC...:

How do you install a Senior Swing 9540 on one leaf of a double door?

Resolution: Surface Mounting - A 9542 HDR2 (Double Door Header) and a 9540-18 mounting plate can be used on the active leaf. A manual closer with a PA (parallel arm) can then be installed on the inactive leaf....:

Do all Senior Swing operators come with the Push-N-Go feature?

Resolution: All Senior Swing models are heavy duty operators and have the Push-N-Go (PNG) feature. This feature is a programmable function in the control module. The PNG settings are:&nb...:

How do you install the LCN 9530 Senior Swing (STD) pull arm?

Resolution: When installing the arm; the gearbox shaft and door must be at the (+90°) full open position. The following step are used to install the Senior Swing (STD) pull arm. Install...:

Can you use a Senior Swing controller as a replacement for an obsolete Mid Swing controller?

Resolution: The Mid Swing was discontinued Sept. of 2009. The Sr. Swing control box has the power boost feature which the Mid Swing control box did not have. If you replace only the Mid Swing control box...: