Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ cylinders for von duprin exit devices ”

Resolution: The ALK uses a 1 1/4" mortise cylinder with straight cam. (NO DOGGING):

What are the part numbers for the Schlage blocking rings?

Resolution: After selecting the correct blocking ring, specify the thickness. The table below shows the different thicknesses that the rings are offered in. &...:

What is the part number for the Schlage thumbturn rim cylinder?

Resolution: The rim cylinder with thumbturn, XB11-979 (Figure 1) was designed to be installed on the inside head of the Von Duprin 98/99–2 double cylinder exit devices, see Figure 1. The rim cylinder with...:

Does the cylinder cam get inverted on the SD option for the Von Duprin 99 exit device?

Resolution: The cylinder cam must be inverted with the SD option to work properly.:

What Schlage cylinders and cams are used with Von Duprin exit devices?

Resolution: Each document below identifes: Schlage cylinder type Schlage cylinder part # Schlage cam type for the exit device & trim series listed. Cli...:

Do the Falcon exit devices have the double cylinder option?

Resolution: A double cylinder(-2) option is not available on a Falcon device but is available from Von Duprin.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ cylinders for von duprin exit devices ”

RELATED FAQS