What are the part numbers for the Schlage blocking rings?

Depending on the application, there are two types of blocking rings offered for mortise cylinders- One for use with a compression ring, and one for use without.  When a compression ring is used, it's diameter is larger than the face of the cylinder, so a larger blocking ring is needed.  When a compression ring is not used, the blocking ring only has to match the cylinder face, so it has a smaller diameter.  See Figure 1 for a comparison.

 

 

Figure 1 - Blocking ring diameter.



 

After selecting the correct blocking ring, specify the thickness.  The table below shows the different thicknesses that the rings are offered in.

  

 

 

 




DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.

Other users ask