Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ common part manuals ”

RELATED FAQS

Resolution: L283-263 and L283-239 are obsolete part numbers that were used to specify "request to exit" on the L9000 and LV9000 locks. To specify RX on L9000 locks after January 2, 2017, specify the lette...:

What finish will the strike and latch be if ordered with a split finish?

Resolution: The door handing determines the finish of the latch and strike. Left reverse and right reverse doors default to outside trimLeft and right hand doors default to inside trimIf lever and ro...:

How do I prevent the ND85 button from rotating?

Resolution: In early 2013 the ND85 plunger assembly was improved to prevent accidental rotation of the inside button. The previous design could allow someone to unintentionally rotate the button and unknowing...:

What is the part number for the blocking ring for use without compression ring?

Resolution: The part number for a Schlage mortise cylinder blocking ring for use without compression ring is the 36-079 (specify dimension and finish).:

Which tailpiece do I use for the AD993-R or the AD993-M?

Resolution: In the AD and CO Series replacement parts guide it shows the same part number 46929295 for the 993R, 993S, and 993M. The pictures show that the 993R and 993S have a flat straight tailpiece and the ...:

What is the part number for the lever return spring for the old M series mortise lock?

Resolution: Falcon is reintroducing the lever return spring for the discontinued Falcon M mortise series. Effective November 1, 2014 the lever return spring is now available for purchase with a list pric...:

What wires are the activation inputs for the Senior Swing?

Resolution: The current (digital control box) activation input wiring harness (# 761464-00) is included in the Sr. Swing parts bag (-518), and has 4 wires in it, Black, White, Yellow, & Gray. ...:

What is the part number for the dogged cam used in modular cylinders?

Resolution: Effective July, 2014, there is no longer a specific modular cam part number for dogging. The Schlage modular straight cams come with two mounting holes that allow for the cams to be mounted inverte...:

When was e.Primus discontinued?

Resolution: e.Primus was an electronic lock system that used iButton credentials to unlock a door. Product was discontinued in July of 2002 with parts were available only for a short time. Product support fo...:

Replacement BNC Cable for SNAP Programmer

Resolution: This product is obsolete and is no longer available from Schlage Electronics.:

What is a 85445-900?

Resolution: The 710095-00 (85445-900) and 84570-900 are the older Sr. Swing analog (non-digital) control. It is replaced by the current Sr. Swing digital control box. If you need to replace an old ...:

Can the 4630/4640 cylinder only be replaced?

Resolution: The 4040(XP) door closer can be used as a temporary replacement in a 4630/4640 operator to provide manual control of the door while the 4630/4640 closer cylinder is being repaired or a replacement ...:

How thick of door will the standard 24/25 series device mounting package work with?

Resolution: Standard mounting packages are only for a 1 3/4" thick door. Door thickness other than 1 3/4" need to be specified when ordering the device.:

Are there any parts available for the old Dor-O-Matic 1200 overhead concealed series closers?

Resolution: The Dor-O-Matic overhead concealed manual door closers have been obsolete since 1999, and there are no parts available for them.:

What is the part number for the Von Duprin maintenance kit?

Resolution: Von Duprin has a maintenance kit part number 050046-00 and maintenance instruction, part number 941079-00 for 98/99 series devices. There are some common parts between 98/99 series and 22...:

Where are the part manuals for Falcon exits?

Resolution: Falcon (19. 24, 25, and XX) parts manuals for Exits are downloadable on the :

When was the Schlage K mortise lock introduced?

Resolution: 1) General Lock was purchased by Schlage - 1973 2) General Lock moved to Security and turned into the K-lock - 1977 3) K-Lock discontinued - approximately 1984 4) L-lock introduced - approxim...:

Which conventional cylinder cam is used with an Adams Rite MS series lock?

Resolution: L583-446; Schlage Adams Rite MS modular cam used on 1 1/8", 1 3/8" and 1 5/8" cylinders L583-447; Schlage Adams Rite MS modular cam used on 1 1/4", 1 1/2" and 1 3/4" cylinders B502-944; Sch...:

Can an L9070 be converted to an L9080?

Resolution: Purchase the L9080 lock case (part number L283-134), switch it with the L9070 case and use the existing trim.: