Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

What diameter hole is necessary in a glass door mounting a pull with the P Mount or Q Mount option?

Resolution: The P Mount and Q Mount options in 1/2" thick glass doors use a 1/2" diameter hole for the mounting hardware.:

Can 98/9947WDC be used with Schlage AD993 trim?

Resolution: No.AD993 trim, when used with CVC or CVR devices by Von Duprin, are for metal doors only.:

What does LCN stand for?

Resolution: For history of Door Closers and LCN see the general section of the LCN catalog, which can be found at the following link.http://us.allegion.com/content/dam/allegion-us-2/web-documents-2/Catalo...:

What do the switches monitor on the E7500 and SS7500

Resolution: One switch monitors the state of the solenoid. I.E. whether lever is in the locked or unlocked state. The other switch monitors the state of the deadlatch/aux latch.:

What do the switches on the E7500 and SS7500 monitor

Resolution: One switch monitors the state of the deadlatch/Aux latch.The other switch monitors the state of the solenoid. I.E. whether the trim lever is locked or unlocked. :

Is the Falcon 25-M exit device handed and reversible?

Resolution: The Falcon 25M is handed and should be ordered with the proper door handing. The center case is not reversible. The mortise lock is field reversible. Lever trim are field re...:

Is this combination valid: RX99L-F with an E996L trim?

Resolution: Yes, that is a valid combination.:

What does MD describe? Example: My customer has this listed as RX99L-F E996L 06 FS 4' MD US26D?

Resolution: In this example, MD stands for Metal Door.:

What is the part number for the torsion springs for 6111

Resolution: Kit # 050942-00 kit includes 972328-00 Torsion spring in the kit.:

When cutting or downsizing the 705 continuous hinge, do I cut from the top or bottom?

Resolution: Cut from bottom up.: