Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

What is the edge seam construction for Republic bullet resistant doors?

Resolution: Seamless:

What is the actual door size for Republic bullet resistant doors?

Resolution: Door undersized from nominal by 1/4" in width and 7/8" in height. Standard undercut is 3/4".:

What is the hinge rail and reinforcement for Republic bullet resistant doors?

Resolution: Hinge edge is non-beveled and reinforced with a continuous 10 gauge steel channel projection welded at a maximum 5" on center. (Backset 1/4"):

What is the lock rail for Republic bullet resistant doors?

Resolution: Lock edge is non-beveled and reinforced with a continuous 14 gauge steel channel projection welded at a maximum 5" on center. 16 gauge reinforcements for mortise or cylindrical locks are of an inte...:

What is the hinge rail and reinforcement for Republic bullet resistant doors?

Resolution: Hinge edge is non-beveled and reinforced with a continuous 10 gauge steel channel projection welded at a maximum 5" on center. (Backset 1/4"):

When ordered as "L" less cylinder, will the CS210 B500/B60 include a Cylinder Housing?

Resolution: The CS210 ordered as L will include the Cylinder Housing but no KIL Cylinder. :

What does the SMID in the Allegion Pricing tool mean when ordering keys?

Resolution: The SMID in the Allegion Pricing Tool means Smith ID and it is used when ordering restricted product. It can be the account # for the restricted product, the locksmith ID, or Facility Code. :

Is an escutcheon indicator available with the PM series lockset?

Resolution: PM series launched in September 2025 with indication being offered with rose trim only. PM series began offering indication on escutcheon trim in October 2026. :

Are there any Dexter closers that are available in the Matte Black 622 finish?

Resolution: Beginning October 1, 2025 Dexter will start to take orders for some model closers in a Matte Black 622 finish.:

When using a 5547 panic exit metal door device with a bar coordinator, is a special cutout or bracket required?

Resolution: The 5547 Panic Exit Metal Door Exit Device does not require a special cutout or a mounting bracket when paired with a bar coordinator.Neither the strike nor the rod release mechanism for the 5547 P...: