Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Can a transom frame have a removable transom bar?

Resolution: Removable transom bars are available for non-rated frames. A closed section mullion available. Special clips to attach to frame sold separately. Removable transom bars are not approved or avai...:

Are 12 gage steel frame available?

Resolution: Steelcraft offer a 12 gage F-Series frame. Basic product offering:Door opening size:Single Door = 4´-0" x 8´-0"Double Door = 8´-0" x 8´-0"Double rabbet only. Single rabbet is not available.Fra...:

Are GrainTech doors available with custom matched colors?

Resolution: Yes, GrainTech® special or custom matched colors are available as long as the colors can be matched.:

What is the 7910-956 direct crossover?

Resolution: The 7910-956 actuator direct replacement is the 8310-856 actuator.:

What actuators can be used on the 8310-866 Bollard post?

Resolution: The LCN Bollard post (8310-866) only accepts the "square" actuators (no round actuators). The size of the Bollard post is 4” X 6” X 36”. Acceptable actuator part numbers are: Hard Wired - 831...:

Are H-Series doors available with seamless edges?

Resolution: For hurricane applications, seamless edges are available as an option:H-Series doors are available with optional seamed filled (HF) seam welded (HW) door edges.HE-Series doors are availab...:

What are the Benchmark cover lengths

Resolution: LCN offers the following Benchmark Covers: a standard 27" Cover a Full Cover of 36" For a pair we offer a 72" cover only. ...:

How do you install the arms on a 9100 Series Benchmark operator?

Resolution: The installation of the arms with the Benchmark and Falcon Swing Door Operator is similar to the Sr. Swing Series . The arms are installed with the main activation input shorted, the gearbox at the...:

No DC output from Power Supply

Resolution: If a power supply is not outputting DC power, 12 or 24VDC at the Power supply main board lower right terminals ( DC+ DC-), there are several potential causes. · &n...:

How do I re-hand the M lock?

Resolution: The lock case can be re-handed, however, this requires opening up the lock case. See M lock re-handing instructions for a complete guide. These instructions are also found in the Falcon M Ser...: