Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

What restrictions are there on ordering DF series tornado frames?

Resolution: Jamb Depths: All DF Series frames are double rabbet only with 1/2” returns. Max 10 3/4”. All frames listed are available in jamb depth increments of 1/8”.:

What size is available for a 3-sided DF series tornado resistant door?

Resolution: 3-Sided, minimum size 3’0” x 6’8” / maximum size 8’0” x 8’0”:

What size is available for a 4-sided DF series tornado resistant door?

Resolution: 4-Sided, minimum size 2’8” x 4’3” / maximum size 8’0” x 8’0”:

What glass lights are available on the DF series tornado resistant door?

Resolution: Glass light assembly only available with standard factory installed glass.:

When ordering a DF series tornado door, must I specify all hardware functions?

Resolution: All hardware functions must be specified when ordering.:

Where can I find the current lead-time for Republic Doors and Frames?

Resolution: You can find the current lead-time for Republic Doors and Frames on the Republic website under the Support tab or the following link: Steel Door and Frame Lead Times | Republic Doors and Frames:

What profiles are available for Republic ME series frames?

Resolution: Equal Rabbet, Unequal Rabbet, Single Rabbet, Double Egress, Cased Opening and Kerf. (Special profiles available, consult factory.):

Are mortar guards available for Republic ME series frames?

Resolution: Mortar guards of 26-gauge steel shall be welded to each hinge and strike reinforcement plate.:

Are double heads undersized for Republic ME series frames?

Resolution: Double heads are undersized 1/16” (except for cased open heads, which are nominal):

Are silencer preps available in Republic ME series frames?

Resolution: 9/32” dia. holes shall be provided as standard on strike jambs and double headers, (3 per strike jamb and 2 per double head). Mutes are not supplied and must be ordered separately.: