What is Blockokey keying?

All lock cylinders on a specific project are operable by a special "project key".  Duplicates of this key may be assigned by the building contractor to workmen and subcontractors as required.  No regular change keys or master keys are needed on the job.  This eliminates the possibility of subsequent exposure from lost or stolen keys.  
  • Falcon’s Blockokey® System is used for extensive master key systems using conventional (non-I/C) cylinders and locksets.
  • Locks are shipped from the factory with a plastic “key block” in the back of every cylinder’s keyway. A shorter 4-pin “Project Key” operates all cylinders while the building is under construction.
  • When construction is complete, use the special KB536 extractor key (removal tool) to remove the key block from each cylinder, thereby voiding operation of the Project Key.
  • To order, specify “Blockokey” after the line item.
  • Example: 72 each D441 626 1AA - 72AA Blockokey


DISCLAIMER:

INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.

YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.

Other users ask