Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ D lock removal tool ”

Resolution: On August 15, 2012 Schlage began shipping a new, more ergonomic, lever removal tool to coincide with Phase 1 of the ND-Series improvement project. This tool can be used for Schlage ND-Series ...:

Is the blue ND lever tool shipped with each lock?

Resolution: The blue lever tool remover, 24002693, is not shipped in every box. The existing wire spring lever removal tool will be included in every box. :

How do you remove an AL lock from a door?

Resolution: AL-Series and discontinued D Lever-Series locks use castle nuts to hold the chassis to the spring cages and to keep the chassis positioned in the door. This causes confusion at times when the lock ...:

Does the Von Duprin E996L trim require the NL drive screw be installed into the device to function properly?

Resolution: Von Duprin 98/99 NL drive screw is located in back of the 98/99 center case assembly. NL drive screw should be left in with trim lock slide plate in up position in the 98/99 exit device with E99...:

What is Blockokey keying?

Resolution: All lock cylinders on a specific project are operable by a special "project key". Duplicates of this key may be assigned by the building contractor to workmen and subcontractors as required...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ D lock removal tool ”

RELATED FAQS