None of the Von Duprin electric strikes will work in a retrofit application where the normal standard mechanical strike is mounted to the frame because none of them are thin enough to fit in the 1/2" thickness of the standard mechanical strike.
For new construction;
HM Frame application;
A Von Duprin 6111, 6112, 6113, or 6300 electric strike could work with a 1790 device on HM frames with a wide enough stop to mount the strike onto. Use the template in the 1790 Installation instructions to determine the location of the device from the surface of the strike. This will require a wider stile on the door depending on the height of the stop and which strike is used.
Aluminum Blade Stop Frame application;
The 6111 and 6113 have a blade stop ship (part 110055 x finish) for use on aluminum blade stop frames. Use the template in the 1790 Installation instructions to determine the location of the device from the surface of the strike. This will require a t least a 2 1/2" stile with the 6111 and at least 2 1/4" stile with the 6113.
The 6300 strike would require a block mounted to the frame to create a surface at the height of the blade stop or cutting out the blade stop for the length of the 6300 strike to create a flat surface to mount the strike onto. Use the template in the 1790 Installation instructions to determine the location of the device from the surface of the strike. This will require a wider stile on the door depending on which option is used.
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.