Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
How do I order an updated AD-Series Main Board Cover?
The original Inside Cover (Fig. 6 and Fig. 8) and the new Inside Covers (Fig. 7 and Fig. 9) are all compatible to the original Main PCB but only the new Inside Covers press on the tamper switch in the new REV F location (Rev F or higher).
These updated covers have already been phased into production since April 2011. To be sure if the cover for your lock is of the latest revision (with the added Tamper Switch post), just inspect your cover to ensure the new Tamper Switch post is present.
If your cover does not have the additional tamper Switch post in the new location, you will need to order an updated version to work with the AD-Series Main Printed Circuit Board; please use the following information:
· COM200C - AD200/250/300 – Cover, + Fasteners
· COM200L - AD200/250/300 – Cover, + Fasteners, w/ LED lens, Less Push-button
· COM200P – AD200/250/300 – Cover, + Fasteners, w/ LED lens, w/ Push-button
· 46928883 – AD400 Wireless Module Cover, + Fasteners, w/ LED lens, Less Push-button
· 46928875 – AD400 Wireless Module Cover, + Fasteners, w/ LED lens, w/ Push-button
When ordering replacement covers you MUST also specify the desired finish for the cover.
DISCLAIMER:
INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE(OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.
YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.