Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Will Schlage levers work on Falcon RU series ”

Resolution: When unlocking the CO200 door by mechanical key override, the green led will be continuously ON until the key is released. This will occur after firmware CO.A.6 (or later) has been installed int...:

Can you get Avalon lever for 25 series lever trim?

Resolution: See 24 and 25 series trim section in the Price Book.:

What is the Falcon cam designation for use on 25 series trims?

Resolution: For standard (non-IC) cylinders, use the Falcon #4 straight cam For IC cylinders, use the Falcon #5 cam :

Are the M and MA locks compatible?

Resolution: No parts are compatible between the Falcon MA-Series and the obsolete Falcon M-Series.:

Will the 25-R or 25-V work with Simplex trim?

Resolution: The 25-R or 25-V device does meet the trim input requirements set by KABA for their trim so the two should be compatible. However, the KABA trim has never been tested in house for the Fa...:

Falcon RU Series

Resolution: Grade 1 unit lock:

Does Falcon have a breakaway lever trim feature on mortise locks?

Resolution: The MA lock does not have Vandlgard or a breakaway trim feature, however, the lever spindle on the MA lock will shear if too much force is applied in order to prevent internal lock damage and resis...:

Will the Von Duprin 6210 electric strike operate with the MA series locks?

Resolution: The Von Duprin 6210 electric strike was designed for retrofit applications and will not work with the Falcon MA series lock when strike and lock body are mounted at standard locations (centerline o...:

Can the Schlage Latitude levers be used with the 98/99 series?

Resolution: The Schlage Latitude levers can't be used with Von Duprin 98/99 series exit devices.:

What is the part number for the Schlage cylinder to work in a Falcon T lock?

Resolution: The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. Schlage offers Falcon Retrofit cylinders to fit many of Falcon's locks. Table 1 below con...:

Can I put a Schlage Key-In-Lever cylinder into a Falcon D100 or D200 lock?

Resolution: For a Schlage "C" keyway: Specify "CP6" as the cylinder suffix when ordering D100 or D200 locks (All other Schlage keyways are not available).:

Will the Schlage CO or AD trim work with the Falcon 25V device?

Resolution: The Schlage AD/CO trims are not compatible with the Falcon 25-V device due to the main cam on the device rotating the opposite direction for a given hand compared to the AD/CO trims output dri...:

Can I get the RU series with a Schlage Full Size Interchangeable core?

Resolution: The RU lock can accept a Schlage Full Size core, but the cylinder suffix must be specified as "J IC-SC" so the correct parts are supplied. The tailpiece will come with the lock. Example: RU581J IC-SC:

Can the Von Duprin 5100 electric strike be used on a pair of doors?

Resolution: The following application information apply to the 5100 electric strike: Can only be used on a single door with a cylindrical lock Can not be used on a pair of doors Can not be used on a mullion:

What is the part number for the lever return spring for the MA lock?

Resolution: Lever assemblies part numbers are found in the Pricebook. Note they are handed.:

Does the PD listed with lock model number mean anything?

Resolution: Schlage and Falcon use the P cylinder suffix to designate conventional key-in-lever (KIL) 6 pin cylinder. The D means that the lock will have a deadlatch.:

What non IC cam is offered by Schlage to work in a Falcon MA lock?

Resolution: Price Book 72A List Price $8.10:

What cylinders are used to operate Von Duprin devices?

Resolution: If unclear whether mortise, rim, or key-in-lever is needed, reference links below to determine what cylinder type is needed. In order to determine cylinder type n...:

How deep of a reveal will an 8200 Falcon Operator accommodate?

Resolution: The maximum reveal for an 8200 Falcon Operator is: 8230 (pull side) -- 1/8" 8240 (push side) -- 6" The Benchmark long rod and shoe (9140-79LR) can be use with the Falcon 8242 for reveal from ...:

What electric strike can be used with the 1790?

Resolution: None of the Von Duprin electric strikes will work in a retrofit application where the normal standard mechanical strike is mounted to the frame because none of them are thin enough to fit in...:

What grade of stainless steel do we use in the levers on L9000 locks?

Resolution: Schlage offers 629 and 630 stainless finishes on levers for the L-Series only. These levers are made of 303 or 304 grade stainless steel.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Will Schlage levers work on Falcon RU series ”

RELATED FAQS