Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ wHICH IS SUITABLE POWER SUPPLY FOR SENTRONIC ”

Resolution: The 4600 Series operator has both a 12VDC and 24VDC output rated at 1A (combined load) to power strikes, maglocks, and other devices, but an EL device "always" has to have a separate PS914-2RS Seri...:

What power supply replaces the Von Duprin 9VDC PS9 power supply?

Resolution: The PS9 power supply was discontinued. The new exit alarm ALK can either use a 9VDC battery or 24VDC regulated power supply. There is no direct replacement for Von Duprin PS9 power supply. Cur...:

Can a magnet, or sentronic device, be released and close the door from a button at a desk?

Resolution: If a door is being held open by the LCN SEM 7800/1900 magnet or any ME/SE Series Sentronic LCN closer, you can remotely release that door to close by ordering the following parts and wiri...:

SENTRONIC

Resolution: General term for the fire/life safety products offered by LCN.:

How many times can an EL device be operated when using a PS914-2RS with battery backup?

Resolution: The Von Duprin PS914-2RS retracts the EL or QEL device approximately 200 times with five second hold time after each pull.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ wHICH IS SUITABLE POWER SUPPLY FOR SENTRONIC ”

RELATED FAQS