Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ what size glass is needed in side lights ”

Resolution: Yes. 1 7/16" thick glass but a special rabbet size is required. The size of rabbet required for the frames would depend on the size of the glazing bead being used. For 1" wide glazing stops, ...:

How is glass cutting size figured for standard or special glass light installed?

Resolution: The GCS (Glass Cutting Size) is determined by adding 1 1/4" to EGS (Exposed Glass Size) to both the height and width dimensions. Ex: EGS = 20" w. x 30" h. GCS = 21 1/4" wide x 31 1/4" high St...:

What is the maximum glass light size available on a 20 minute sidelight frame?

Resolution: On fire rated transom and/or sidelight frames and fire rated window frames, Steelcraft labeling procedures only control the O/A width and/or height of the frames based on wall condition. The amount...:

What fire ratings are available on DW-Series Borrowed Lights?

Resolution: DW-Series Fire Rated Borrowed Lights are available in the following sizes: 60 minute (1 hour) rating = 2721 square inches of visible glass. maximum frame rabbet to rabbet dimensions = 78 1/4...:

What is the maximum glass light size on a 3 hour (180 minute) fire rated door?

Resolution: Maximum glass light sizes for 3 hour fire doors is as follows: Wire glass - not approved for use in 3 hour fire doors. Ceramic glass: UL & ITS/WH allow one (1) light with 100 square inc...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ what size glass is needed in side lights ”

RELATED FAQS