Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ what is laminated core process ”

RELATED FAQS

Resolution: Honeycomb, Polystyrene, Polyurethane, Mineral Board ; L-Series, SL-Series T-Series, CE-Series,:

Can a 1 3/4" thick panel be used in a fire rated transom frame with a transom bar?

Resolution: Transom panels are available in the following constructions: 1 3/4" thick panels with interior construction similar to an L-Series door installed into a frame either Without a transom bar - r...:

Is a standard cylinder keyway such as "C" available in SFIC?

Resolution: It is not possible to key SFIC and standard cylinders including Schlage FSIC into the same system. A keyway name may be shared between the two key fami...:

How can you tell the difference between the FSIC and SFIC cores?

Resolution: There are several ways to spot differences, see Figure 1, but the easiest is to look at the face of each core. The face of both cores looks like a "figure 8". With small format, bo...:

What parts are needed to convert JD to BD on an ND lock?

Resolution: For ND Locks shipping prior to January 30, 2017:The springcage(s), lever, and core driver will need to be changed. Depending on the function the components below are required.Outside spring c...:

How do I specify temporary construction cores?

Resolution: Use the cylinder suffix 'T' for full size interchangeable core or the cylinder suffix 'HD' for small format interchangeable core, see Figure 1. Small format also has a disposable core option ...: