Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ what is kd Bitted ”

RELATED FAQS

Question
Answer
What is the control key bitting for 0 bitted small format interchangeable cores?
For all Schlage and Falcon small format interchangeable cores shipped from the factory 0-bitted, the control key will be cut to all 4's.
What is the control bitting for Falcon 0 bitted cores?
A zero bitted Falcon SFIC core is combinated for the control key to be cut at all 4's.
Can Everest D keys be 1 bitted?
These keys can be ordered and cut as 1 bitted.
What is the 40-100 multi-tailpiece cylinder kit?
The 40-100 is a multiple tailpiece pack with a pre-assembled, 0-bitted, key-in-knob cylinder.  The kit includes the following: (1) Pre-assembled cylinder 0-bitted, less tailpiece 40-100 (...
The pack is available in all keyways, Everest and Classic families including restricted keyways except Primus. 
What fire ratings are available on DW-Series Borrowed Lights?
DW-Series Fire Rated Borrowed Lights are available in the following sizes: 60 minute (1 hour) rating = 2721 square inches of visible glass. maximum frame rabbet to rabbet dimensions = 78 1/4...
Are frames available without backbends?
F-Series frames are available without returns: Fire Rated frames must have welded corners. Frames must include weled in wood or steel stud anchors. Installation requirements: Frames must be...
What is the rough opening in walls for frame installations?
The rough opening dimensions are the same for either Welded (SUA) or Knock Down (KD) frames For F, FN, FE, DE, MU three sided frames and four sided borrowed light frames: New masonry Walls: N...
 For DW, K three sided frames and four sided borrowed light frames: Three sided frame = door opening width (order size) plus 1 1/2" minimum to 2" maximum and the door opening height ...