Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ what is frame reveal ”

RELATED FAQS

Resolution: Reveal should not exceed: 6" for the REGULAR ARM 9 3/4" for the LONG ARM:

What is the minimum and maximum reveal for a 9500 Series Senior Swing operator?

Resolution: The 9542, 9553, 9563 surface mounted Senior Swing with a regular arm, mounted on the push side of the door, can handle a reveal from 1 1/8" up to 10". The 9542, 9553, 9563 surface mounted Senior S...:

How do you install the LCN 9540 Senior Swing (REG) push arm?

Resolution: When installing the arm; the gearbox shaft and door must be at the (+90°) full open position. The following step are used to install the Sr. Swing (REG) push arm. Install t...:

Does a SEH require a door closer?

Resolution: The SEH is an "electronic holder" (ONLY) that is used to hold open a Fire Rated opening. It requires a door closer to be mounted on the opposite side. It is normally used on an existing opening wit...:

Which arm is the same as the 4640 regular arm?

Resolution: The 4640 Regular arm (4640-3077) is the same as: 4040 Long Arm 4820 Regular arm. The arms listed above are for reveals up to 4 1/2" and have a 8 3/8" long rod and shoe. 4640 Long arm ...:

What special template (ST) is used with a 4640 operator and a deep reveal?

Resolution: The "Regular Arm" allows for a reveal up to 4-1/2".The "Long Arm" allows for a reveal between 4-1/2"- 8".ST-3088 is a special "Extra Long Rod" used to mount a 4640 operator on an opening ...:

How deep of a reveal will an 8200 Falcon Operator accommodate?

Resolution: The maximum reveal for an 8200 Falcon Operator is: 8230 (pull side) -- 1/8" 8240 (push side) -- 6" The Benchmark long rod and shoe (9140-79LR) can be use with the Falcon 8242 for reveal from ...:

What is the maximum reveal for a regular arm 4642 operator?

Resolution: Max. reveal for a 4642: 4640 Regular arm -- 4.5" 4640 Long arm -- 8" 4640 x ST-3088 ( custom made - extra long rod) -- 8" to 11" No special mounting instructions required, just standard templ...:

Can a 4040XPT DE be used with a 4" reveal on the pull side?

Resolution: The LCN 4040XPT with a reveal deeper than 1/8" on the pull side of the opening requires a Double Egress (DE) arm.DE arms are handed arms and cannot have handing changed in field.ST3073 Standard 404...: