Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ what is clear opening height? ”

RELATED FAQS

Resolution: Clear Opening Width for swinging doors is measured (with the door open 90 degree) from the face of door to stop soffit on strike jamb. &nbs...:

How many compression anchors are provide per jamb on DW-Series frames?

Resolution: For compression anchor details refer to the “ANCHORING SYSTEMS” section in the Steelcraft Tech Data Manual.Anchor Quantities: • 1 compression anchor per jamb through 9"depth • ...:

What are the ANSI recommendations for the actuator mounting height and distance between the wall actuator and the door opening?

Resolution: Always check the most current revision of the ANSI A156.19 standard for recommendation or requirement of the location of a Knowing Act switch. 2019 ANSI A156.19 states the requirement of the ...:

What are the frame hinge locations for a 9'0" door opening?

Resolution: From Head to top of each 4 1/2" hinge is 7 1/2", 36 51/64", 66 3/32" & 95 25/64". From Head to top of each 5" hinge is 7 1/4", 36 35/64", 65 27/32" & 95 9/64".:

Will the new concealed vertical cable system work with any door height?

Resolution: :

What is the minimum clear opening width required by ADA on a single door?

Resolution: The minimum clear opening width for ADA is 32" measured from face of door opened to 90 degrees to face of stop on strike jamb. There must be no hardware mounted to the door projectin...:

DOOR OPENING HEIGHT

Resolution: Nominal opening height, Nominal Height:

Can a Von Duprin 3' pushpad exit device be converted to a 4' device in the field?

Resolution: A 3' exit device cannot be converted to a 4' exit device. You will need to replace the 3' device with a 4'. Conversely, a 4' device cannot be converted to a 3' device. Converting these exit de...:

What is the rough opening in walls for frame installations?

Resolution: For DW, K three sided frames and four sided borrowed light frames: Three sided frame = door opening width (order size) plus 1 1/2" minimum to 2" maximum and the door opening hei...: