Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ what functions are available with an RX switch ”

RELATED FAQS

Resolution: The RX request exit switch is not available with 94/95 exit devices.:

Do we offer a RX switch for the 17 or 18 device?

Resolution: This option is not available. The 17 & 18 Series devices were discontinued in August 2009 and the new Falcon RX Switch is mounted to a bracket that fits in the pushpad...:

Does the Von Duprin ALK require the RX switch to operate?

Resolution: The RX switch is required to activate the ALK. The RX switch monitors the pushbar and will signal the ALK to go into alarm when the pushbar is depressed. The RX switch also allows free in...:

How do I change the function of the Von Duprin 7500 mortise lock from Lever ( classroom ) to NL ( night latch )?

Resolution: To convert the Von Duprin 9975L to 9975NL exit function follow these steps (Note: the mortise lock is shipped as Night Latch from the factory): Turn the NL screw on 7500 mortise lock counter clo...:

What is the L9080 by L283-263?

Resolution: L283-263 and L283-239 are obsolete part numbers that were used to specify "request to exit" on the L9000 and LV9000 locks. To specify RX on L9000 locks after January 2, 2017, specify the lette...:

Is the MA lock available with the RX feature?

Resolution: The MA RX features a single switch within the chassis that will monitor both the inside and outside knob/lever. The switch is only available as Normally Open (NO).:

When did we Von Duprin release the RX996L trim as a standard?

Resolution: The Von Duprin RX996L trim was released to standard order entry in May 2010. The Von Duprin 996L and 996L-BE trims can be ordered with RX switch. The 996L-NL and 996L-DT trims can not have the...:

Will Von Duprin supply the 996L, 996L-BE, 996L-NL and 996L-DT trims with an RX switch?

Resolution: Von duprin will supply the 996L and 996L-BE trims with RX switch. Von Duprin will not supply the 996L-NL and 996L-DT trims with RX switch because the switch monitors the lever movement and the leve...:

Does the Falcon T series have an RX option available?

Resolution: The Falcon T series was discontinued August 12th, 2026 and was replaced by the Falcon TM series. The Falcon T Series lock does not have an RX switch available.:

Can the CD cylinder dogging and RX switch be ordered with 33/35 or 98/99 exit device?

Resolution: This can be done ONLY with non fire rated exit devices.:

Does a Von Duprin ALK kit come with an RX switch?

Resolution: ALK kit comes with standard RX switch. It can be ordered without the RX switch or with LX switch as an option.:

What power supply is used with RX or LX switches?

Resolution: The RX switch is request exit and the LX switch is latch bolt monitor switch. They do not require a power supply directly. The electrified hardware that the RX or LX switch...:

Can a pneumatic (PN) 33A/35A/98/99 exit device use the RX or LX switches?

Resolution: PN33/35/98/99 Pneumatic exit devices are not usually used with RX or LX switches since the Pneumatic PN device is used instead EL to eliminate the electric from the device.:

Can you field install a RX switch on the 24/25 device?

Resolution: The RX switch can be installed at the factory when device is ordered or in the field with part# 650359-00. Installation instructions here will show how the RX swi...:

Who can adjust or replace the Chexit RX switch?

Resolution: For Chexit devices with solenoid driven shipped from the factory prior to 8-24-2015, the RX switch is ordered as a "Special CX RX Switch". It may only be installed or adjusted ...:

How to test the RX switch in a Chexit device.

Resolution: Chexit devices shipped prior to 8-24-2015 with solenoid driven: If Chexit device goes into alarm with fast flashing red LED after the rearm time, the RX switch may be out of adjustment or defect...:

AD changing Function in the field

Resolution: -On the AD series offline locks only you can change the lock function from Classroom/Storeroom to a Privacy, office or apartment function out in the field. - This is done via the HHD/SUS using...:

What degree of lever rotation is required to operate the RX feature?

Resolution: The RX switch is activated at approximately 18 degrees of lever rotation. :