Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
what finishes are available for mortise cylinders
”
RELATED FAQS
Question
Answer
What is the thread on a mortise cylinder?
Resolution:
The thread spec on Schlage and Falcon mortise cylinders is 1.150 x 32:
Are parts still available for the old Falcon M locks?
Resolution:
Related solution: What is the part number for the lever return spring for the old M series mortise lock?:
What mortise cylinder cam is needed for KR4023?
Resolution:
The KR4023 mullion requires a 1-1/4" mortise cylinder with straight cam. This is stated in box 7 on the first page of the KR4023 mullion instructions.:
Do the Falcon exit devices have the double cylinder option?
Resolution:
A double cylinder(-2) option is not available on a Falcon device but is available from Von Duprin.:
What type of cylinder is the 30-001?
Resolution:
The 30-001 is a conventional mortise cylinder with a clover cam, compression ring and spring for use on rose trim. For use with the L9000 mortise locks except for the L9060 outside cylinder.:
Is the C987 a small format or full size core?
Resolution:
The "C" indicates small format IC core, which is the only core style Falcon products. The C987 will be provided less core unless -6, or -7 suffix is specified (6 or 7 pin core) Example:...:
Why can't I order an AD-Series or CO-Series mortise deadbolt with a classroom/storeroom (70) function
Resolution:
* NOTE: the AD300/400 devices simply communicate the change in Deadbolt Position status to the Host software. The software then decides what action should or should not be taken at the device. :
How do you specify cylinder dogging for mortise cylinders?
Resolution:
When ordering dogging with cylinder; specify complete cylinder with appropriate option below: XQ11-949 for all conventional cylinders XQ11-948 for full size and small ...:
Can you use a CD conversion kit on a 22 device?
Resolution:
Cylinder dogging CD is not available with 22 series exit device.:
What ligature resistant trim is available on the ND or L9000?
Resolution:
High Risk Areas*Patient bedroomIn-suite bathroomIn-suite closetTime-out roomPatient difficult to manage; or risk of solitary and/or unsupervised areas.Medium risk areas*Living roomDining roomGroup ...:
Does the Von Duprin CD kit include the machined cover plate for the cylinder?
Resolution:
The Von Duprin CD kit comes with the cover plate machined to accept the cylinder dogging mortise cylinder.1 1/4" mortise cylinder with an inverted straight cam is required for CD option on Von Dupr...:
Does Schlage offer a cam that will work with a Yale mortise lock?
Resolution:
Schlage offers a comparable cam to the Yale 2160 and it will operate any Yale lock that utilizes the Yale 2160 cam. Schlage Cams for Yale 2160 Part Number Description B520-7...:
What cylinder is used for the Falcon 510L and 510L-NL trim?
Resolution:
The Falcon Monarch 510L and 510L-NL trim will accept either a 1 1/4" Mortise cylinder with a straight cam or a 1 3/8" Mortise cylinder with a straight cam using the blocking ring provided with the ...:
What non IC cam is offered by Schlage to work in a Falcon MA lock?
Resolution:
Price Book 72A List Price $8.10:
What cylinder and cam is used with the 650 series keyswitch?
Resolution:
If blocking rings (PN 36-079) are needed, specify dimensions when ordering. See below for blocking ring (PN 36-079) dimensions. Blocking RingSpecify Dimension 1//8" 012 3/16"&nb...:
What is the part number for the Schlage thumbturn rim cylinder?
Resolution:
The rim cylinder with thumbturn, XB11-979 (Figure 1) was designed to be installed on the inside head of the Von Duprin 98/99–2 double cylinder exit devices, see Figure 1. The rim cylinder with...:
Available kits to convert classroom mortise locks to classroom security locks.
Resolution:
Schlage has conversion kits to convert the classroom L/LV9070 to the classroom security L/LV9071 and the classroom holdback L/LV9076 to the classroom security holdback L/LV9077. The...:
Which closers are available with the TEL option?
Resolution:
The TEL option is only available on the 4010, 4020, and the 4110 series closers. The 4041/4040XP is not available with TEL (telephone closer). :
Can the modular cams be used on the older cylinders?
Resolution:
The cams for modular cylinders are unique and are not compatible with any non-modular mortise cylinders, Schlage or any competitors.:
Why does my AD or CO series lock unlock when the lever is raised?
Resolution:
Installers have reported that their AD-CO Series cylindrical or mortise locks will unlock whenever the outside lever is lifted. This will occur if the outside spindle (square post) is install...:
What cylinders are available with UL437?
Resolution:
UL437 is testing requirement that cylinders pass both a timed cylinder pick test, a forceful core/cylinder pull test as well as a destructive entry test. We have various c...:
Is a standard cylinder keyway such as "C" available in SFIC?
Resolution:
It is not possible to key SFIC and standard cylinders including Schlage FSIC into the same system. A keyway name may be shared between the two key fami...:
Are Graintech doors available with GrainTech on one face and standard panels on the others face?
Resolution:
GrainTech® doors are not available with different finishes on the inside and/or the outside door panels. Both panels must match.Standard GrainTech® finishes include:BirchAshOakMapleM...:
Is a mortise cylinder coin turn offered?
Resolution:
Coin turn will need to be on a separate line item, specify 09-487 x length (118, 114, 138).This cylinder coin turn is non-handed so it can rotate freely in both directions.:
Are the 643e and 716 finishes the same?
Resolution:
The commercial Aged Bronze finish (643e) is the BHMA equivalent to a copper plated, blackened, relieved and then clear coated product. This commercial finish is identical to the residential Aged ...:
What cylinder length do you use for escutcheon trim for the L series mortise lock?
Resolution:
Typically for a 1-3/4" door you would use a 1-1/4" cylinder. Use the Table in the Pricebook for a reference:Note: The 30-001 used with Rose trim on double cylinder applications requires a Blo...:
What cylinder length options are available?
Resolution:
There are different mortise cylinder length options depending on the cylinder type. Below is a list of available options for conventional, FSIC, and SFIC cylinders, as well as the convent...:
Is the Schlage Latitude and Longitude lever available in a stainless steel finish?
Resolution:
Beginning January 2, 2013 Schlage will offer the Latitude (LAT) and Longitude (LON) levers in the 629 and 630 stainless steel finishes.:
What cylinder do I use on a Von Duprin Keyed Removable Mullion?
Resolution:
see installations instructions here :
What is the CO-220?
Resolution:
The Schlage CO-220 is standalone classroom lock down solution with remote fob and visual indicator which allows immediate local lock down by simply pushing the button on the remote fob from anywher...:
When was the ME high residential and 505 finish discontinued?
Resolution:
The ME trim was discontinued in 2001 and no longer available.:
What is a modular cylinder?
Resolution:
Click here for the Schlage Modular Cylinder Marketing Sell Sheet for information on the modular cylinder.:
What is the part number for the blocking ring for use without compression ring?
Resolution:
The part number for a Schlage mortise cylinder blocking ring for use without compression ring is the 36-079 (specify dimension and finish).:
Are ND locks available in 629 or 630 finishes?
Resolution:
The AL and ND locks are not available in any stainless steel finishes. The only option is either the 626 satin chrome or 625 bright chrome.:
What is the part number for the dogged cam used in modular cylinders?
Resolution:
Effective July, 2014, there is no longer a specific modular cam part number for dogging. The Schlage modular straight cams come with two mounting holes that allow for the cams to be mounted inverte...:
What cylinder is required for the 360L from Von Duprin?
Resolution:
A 1 1/4" mortise cylinder with straight cam (similar to the Schlage B502-191) or a 1 1/2" mortise cylinder with straight cam using supplied spacer collar. Cylinder length does not chan...:
What finishes are the L locks available in?
Resolution:
The finishes below are available on the L9000, some lever designs and trims are not available in all finishes. 605 Bright Brass 606 Satin Brass 609 &...:
Will the Von Duprin 376T control accept a 1 1/8" mortise cylinder?
Resolution:
The Von Duprin 370 series control required a 1 1/4" mortise cylinder and will not operate with 1 1/8" mortise cylinder.:
What cam to use for a modular cylinder in Sargent mortise lock?
Resolution:
The Sargent cams listed below work for all applications except 16 inside and 50 outside. The equivalent Sargent cam is the 13-0660. Use the B520-736 for modular cylinder lengths of 1 1/8",...:
What products are available with an antimicrobial finish?
Resolution:
DESCRIPTION: The antimicrobial coating is specially formulated to inhibit the growth of bacteria by interrupting cell multiplication. The result is that the silver ions surround bacterial cells, ...:
Do we offer a parts pack for modular mortise or rim cylinder?
Resolution:
See descriptions for the 09-992 thru 09-997 parts kits for modular mortise cylinders. The 09-998 is a kit for a rim cylinder. :
Can you order the old non-modular mortise cylinder?
Resolution:
We have completed our transition to the modular design and no longer have the old design.:
Mortise cylinder with switch.
Resolution:
These cylinders are designed with a microswitch attached to the back of the cylinder. The switch is operated by a cam when the key is rotated. To order: XB09-195 Mort...:
What cylinder does the 512 TP NL use?
Resolution:
A 1-1/8 through 1-1/2" mortise cylinder with straight cam per Step 4 of 512NL Instructions.:
What is the standard Falcon cam?
Resolution:
Cams for other applications may be specified with no additional charge, see pricebook.:
Are stainless steel doors and frames available?
Resolution:
Yes, stainless steel doors and frames are available. Door Construction: LS-Series: Visible edge seams Door construction similar to the ...:
DOUBLE CYLINDER (RIM & MORTISE ONLY)
Resolution:
99-2:
What Schlage cam will operate Sargent locks?
Resolution:
Click here for a list of available Schlage cams comparable to the Sargent 13-0660. :
What is the part number for the lever return spring for the old M series mortise lock?
Resolution:
Falcon is reintroducing the lever return spring for the discontinued Falcon M mortise series. Effective November 1, 2014 the lever return spring is now available for purchase with a list pric...:
What type of cylinder is the 20-001?
Resolution:
The 20-001 is a conventional mortise cylinder with a straight cam, compression ring and spring for use on rose trim. For use with the L9060 outside cylinder or other straight cam applications.: