Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
What are door levels and models?
”
RELATED FAQS
Question
Answer
What are door levels and models?
Resolution:
Levels and Models (covered in ANSI A250.8 (SDI 100) "Recommended Specifications for Standard Steel Doors and Frames") are SDI term aid in the selection and specification pr...:
Can I remotely open the NDE80 with my phone app?
Resolution:
The NDE80 locks do not support remote UnLock commands.You would need to interface to a 3rd party Access Control System.You can use Schlage Mobile credential with the NDEB model (just as a credential).:
Will a 25 series device directly replace a like model 18 series device?
Resolution:
The 25 series devices was designed to replace the 18 series & will completely cover existing door prep from a 18 series device. However, some door re-prep is required for the current 25 de...:
What is a 4430 / 4330?
Resolution:
The 4330 / 4430 is an obsolete ME closer replaced by the 4310ME or 4410ME Series.:
How do I use an AD-Series Relay Board (RLBD)?
Resolution:
This RLBD data sheet can also be found at Schlage/Technical Support. RLBD DataSheet :
How do I change signal levels on my PIM400 -TD2 outputs?
Resolution:
These SUS settings have no effect when the AD400 is linked to a PIM400-485; because the PIM400-485 reports the logic status with RSI-485 commands and not logic levels. The settings are gray...:
What is the model number for the Ives door edge pull?
Resolution:
The sliding door edge pull is part number 230.: