Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ warranty on primer ”

RELATED FAQS

Resolution: Steelcraft does not offer factory powder coated doors and/or frames. Powder coatings usually require heat between 300 to 400 degrees to melt and cure the powder coat. The higher heat can ca...:

What do you do if rust spots show up on steel doors and frame material?

Resolution: During the construction cycle, spot rust is usually attributed to either material handling damage or improper storage of the material on the jobsite. The material must be repaired and repainted as ...:

What is the Falcon SZ-Series Door?

Resolution: Falcon SZ Series Door is the economy Steelcraft commercial grade door recommended light commercial applications when architectural specification are not needed. Options: The SZ-Series door is...:

What causes doors and/or frames to rust?

Resolution: Prime or painted surfaces which have been scratched or otherwise marred during installation (including field welding) and/or cleaning must be field repaired and re-primed by the installing contractor.:

SPECIAL RUST INHIBITOR

Resolution: SRI, primer:

Steelcraft field paint instructions

Resolution: Steelcraft frames and doors are furnished with a high grade, low gloss, baked-on prime paint that provides the best possible protection against corrosion, abrasion and weather, and is an excellent ...:

What types of steel are used in commercial steel doors?

Resolution: The three most common steel types are cold rolled steel, galvannealed steel, and galvanized steel. Cold Rolled Steel (CRS) is suitable for most interior applications, is uncoated steel a...:

PRIME PAINT

Resolution: Primer:

Does Steelcraft prime paint doors and frame?

Resolution: All Steelcraft Frame, Door and Architectural Stick components will receive one coat of sprayed-on factory paint which is a baked-on, rust-inhibited primer that conforms to the industry standard ANS...: