Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ warranty for electrified exit devices ”

Resolution: See here for our Warranty Information. :

How do I wire an EL device to normally hold open the latch and release it during a fire alarm?

Resolution: Use a normally closed fire alarm as the input to the power supply option board (PS873-2 or PS914-2RS), this will hold the latch retracted. During a fire alarm, the contact will open, dropping...:

What power supply is required for two EL devices and one LCN auto operator?

Resolution: Von Duprin PS914 x 900-4RL supports two EL with two auto operator.:

Is there a template that shows where to drill the hole for E/EL/SS/RX/LX/CX wires?

Resolution: The hole should be drilled in the field once the end cap is located on the door. It is a 5/8" hole, that is located 5/16" from the end of the mechanism case. See installation instruction of t...:

Is the Von Duprin EL option available on Von Duprin XP98 or XP99 exit devices?

Resolution: The EL (Electrified) option is available with Von Duprin XP98/99 exit devices. To order, specify ELXP98/99 with proper trim.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ warranty for electrified exit devices ”

RELATED FAQS